HCPL-3120 Datasheet, PDF (3/15 Pages) Agilent(Hewlett-Packard) – 2.0 Amp Output Current IGBT Gate Drive Optocoupler

Reflow Temperature Profile
260
240
220
200
180
160
140
120
100
80
60
40
20
0
0
∆T = 115°C, 0.3°C/SEC
∆T = 100°C, 1.5°C/SEC
1 23
45678
TIME – MINUTES
∆T = 145°C, 1°C/SEC
9 10 11 12
MAXIMUM SOLDER REFLOW THERMAL PROFILE
(NOTE: USE OF NON-CHLORINE ACTIVATED FLUXES IS RECOMMENDED.)
Regulatory Information
The HCPL-3120 has been
approved by the following
organizations:
UL
Recognized under UL 1577,
Component Recognition
Program, File E55361.
CSA
Approved under CSA Component
Acceptance Notice #5, File CA
88324.
VDE (Option 060 Only)
Approved under VDE 0884/06.92
with V_IORM = 630 V peak.
VDE 0884 Insulation Characteristics (Option 060 Only)
Description
Installation classification per DIN VDE 0110/1.89, Table 1
for rated mains voltage ≤ 300 V rms
for rated mains voltage ≤ 450 V rms
Climatic Classification
Pollution Degree (DIN VDE 0110/1.89)
Maximum Working Insulation Voltage
Input to Output Test Voltage, Method b*
V_IORM x 1.875 = V_PR, 100% Production Test with t_m = 1 sec,
Partial discharge <5 pC
Input to Output Test Voltage, Method a*
V_IORM x 1.5 = V_PR, Type and Sample Test, t_m = 60 sec,
Partial discharge <5 pC
Highest Allowable Overvoltage*
(Transient Overvoltage t_ini = 10 sec)
Safety Limiting Values–Maximum Values Allowed in the Event
of a Failure, Also See Figure 37, Thermal Derating Curve.
Case Temperature
Input Current
Output Power
Insulation Resistance at T_S, V_IO = 500 V
Symbol
V_IORM
V_PR
V_PR
V_IOTM
T_S
I_{S, INPUT}
P_{S, OUTPUT}
R_S
Characteristic Unit
I-IV
I-III
55/100/21
2
630
Vpeak
1181
Vpeak
945
6000
Vpeak
Vpeak
175
°C
230
mA
600
mW
≥ 10⁹
Ω
*Refer to the front of the optocoupler section of the current catalog, under Product Safety Regulations section, (VDE 0884) for a
detailed description of Method a and Method b partial discharge test profiles.
Note: Isolation characteristics are guaranteed only within the safety maximum ratings which must be ensured by protective circuits in
application.
1-184