HMC6001LP711E Datasheet, PDF (9/18 Pages) Hittite Microwave Corporation – WiGig Single Carrier Modulations

HMC6001LP711E
v00.1112
MILLIMETERWAVE RECEIVER
57 - 64 GHz
Table 7. Pin Descriptions
Pin Number
1
2
3, 8-14, 20, 21, 51
4
5
6
7
15
16
17
18
19
Function
SCANOUT
RESET
NC
VDD_PLL
REFCLKM
REFCLKP
VCC_REG
VCC_DIV
VCC_TRIP
VCC_IF
VCC_MIX
VCC_LNA
22-50
GND
52
ENABLE
53
CLK
54
DATA
55
VOUT_QM
56
VOUT_QP
57
VDDD
58
VCC_BUF
59
VOUT_IM
60
VOUT_IP
Description
Serial digital interface out (1.2V CMOS) - 50kΩ
Asynchronous reset-all registers (1.2V CMOS, active high) - 50kΩ
These pins are not connected internally
1.35 supply (VCO)
Xtal REF CLK Minus - AC or DC coupled - 50Ω
Xtal REF CLK Minus - AC or DC coupled - 50Ω
2.7V supply (VCO)
2.7V supply (Divider)
2.7V supply (Tripler)
2.7V supply (IF)
2.7V supply (Mixer)
2.7V supply (LNA)
These pins and package bottom must be connected to RF/DC ground
externally.
Serial digital interface enable (1.2V CMOS) - 50kΩ
Serial digital interface clock (1.2V CMOS) - 50kΩ
Serial digital interface data (1.2V CMOS) - 50kΩ
Baseband negative quadrature output – DC coupled - 50Ω (1.3V c.m.)
Baseband positive quadrature output – DC coupled - 50Ω (1.3V c.m.)
1.35 supply (serial data interface)
2.7V supply (BB VGA and output buffers)
Baseband negative in-phase output – DC coupled - 50Ω (1.3V c.m.)
Baseband positive in-phase output – DC coupled - 50Ω (1.3V c.m.)
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
9
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]