HMC6001LP711E Datasheet, PDF (2/18 Pages) Hittite Microwave Corporation – WiGig Single Carrier Modulations

HMC6001LP711E
v00.1112
MILLIMETERWAVE RECEIVER
57 - 64 GHz
Table 1. Electrical Specifications, TA = +25° C, See Test Conditions
Parameter
Condition
Min.
Frequency Range
57
Frequency Step Size
308.5714 MHz Ref Clk
Frequency Step Size
285.714 MHz Ref Clk
Modulation Bandwidth
Max BW setting, 5dB BW, double-sided
Max Gain
Total Pout at all 4 baseband outputs minus
Pin at the IC [1]
Gain Control Range
Gain Step Size
Antenna Gain
Measured on Evaluation Board
Noise Figure
at Max Gain with Antenna [2]
Input IP3
Pin at IC [1], set to Min Gain
Input P1dB
Pin at IC [1], set to Min Gain
Image Rejection
Sideband Suppression
Phase Noise @ 100 kHz
Phase Noise @ 1 MHz
Phase Noise @ 10 MHz
Phase Noise @ 100 MHz
Phase Noise @ 1 GHz
PLL Loop BW
Internal Loop Ffilter
Power Dissipation
[1] Does not include antenna gain.
[2] Specification includes loss contribution due to antenna-in-package.
Typ.
0.54
0.50
1.8
67
65
1
7.5
7
-27
-36
>35
27
-72
-86
-111
-125
-127
200
0.610
Max.
64
Units
GHz
GHz
GHz
GHz
dB
dB
dB
dBi
dB
dBm
dBm
dB
dBc
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
kHz
W
Table 2. Test Conditions
Reference frequency 308.5714 MHz
Temperature
+25°C
Gain Setting
Max
Input Signal Level
-65 dBm
IF Bandwidth
Max
Input Impedance
50Ω Single-Ended
Output Impedance
100Ω Differential
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
2
Application Support: Phone: [phone] or [e-mail]