HMC6001LP711E Datasheet, PDF (11/18 Pages) Hittite Microwave Corporation – WiGig Single Carrier Modulations

v00.1112
Evaluation PCB Motherboard
HMC6001LP711E
MILLIMETERWAVE RECEIVER
57 - 64 GHz
Evaluation PCB Schematics
To view the Evaluation PCB Schematics please visit www.hittite.com and choose HMC6001LP711E from the “Search
by Part Number” pull down menu to view the product splash page.
Evaluation Kit
The HMC6450 evaluation kit contains everything that is needed to set up a bi-directional 60 GHz millimeter-wave
link using standard RF cable interfaces for baseband input and output. Kit comes with two motherboard PCBs
that provide on board crystals, USB interface, supply regulators, and SMA cables for connectorized IQ interfaces.
Supplied software allows the user to read from and write to all chip level registers using a Graphical User Interface
(GUI) or upload previously saved register settings.
Evaluation Kit Order Information
Item
Evaluation Kit
Contents
2 Daughtercard Evaluation PCBs with HMC6001LP711E and HMC6000LP711E
2 Motherboard Evaluation PCBs with crystals, USB Interface, supply regulators and
MCX connectorized IQ interface.
2 Wall mount power supplies.
2 USB A Male to USB B Female Cable
8 Phase matched MCX to SMA Cables
CD ROM (Contains User Manual, Evaluation PCB Schematic, Evaluation Software)
Part Number
HMC6450
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
11
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]