HMC717LP3 Datasheet, PDF (8/10 Pages) Hittite Microwave Corporation – GaAs PHEMT MMIC LOW NOISE AMPLIFIER, 4.8 - 6.0 GHz

v02.0809
HMC717LP3 / 717LP3E
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER, 4.8 - 6.0 GHz
Pin Descriptions
Pin Number
1, 3 - 7, 9, 10,
12, 14, 16
Function
N/C
Description
No connection required. These pins may be connected
to RF/DC ground without affecting performance.
Interface Schematic
7
2
RFIN
This pin is DC coupled
See the application circuit for off-chip component.
8
BIAS
This pin is used to set the DC current of the amplifier by
selection of the external bias resistor. See application circuit.
11
RFOUT
This pin is AC coupled and matched to 50 Ohms
13, 15
Vdd2, Vdd1
Power supply voltage. Bypass capacitors are required.
See application circuit.
GND
Package bottom must be connected to RF/DC ground
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]
7-8