HMC717LP3 Datasheet, PDF (10/10 Pages) Hittite Microwave Corporation – GaAs PHEMT MMIC LOW NOISE AMPLIFIER, 4.8 - 6.0 GHz

v02.0809
Evaluation PCB
HMC717LP3 / 717LP3E
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER, 4.8 - 6.0 GHz
7
List of Materials for Evaluation PCB 122416 ^[1]
Item
J1, J2
J3 - J5
C1
C2, C4
C3, C5
C6
R1
R2, R3
U1
PCB ^[2]
Description
PCB Mount SMA Connector
DC Pins
10 nF Capacitor, 0402 Pkg.
1000 pF Capacitor, 0603 Pkg.
100 pF Capacitor, 0603 Pkg.
1.2 pF Capacitor, 0402 Pkg.
2k Ohm Resistor, 0402 Pkg. (Rbias)
0 Ohm Resistor, 0402 Pkg.
HMC717LP3(E) Amplifier
120586 Evaluation PCB
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation board should be mounted to an appro-
priate heat sink. The evaluation circuit board shown
is available from Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]
7 - 10