HMC714LP5 Datasheet, PDF (3/40 Pages) Hittite Microwave Corporation – DUAL RMS POWER DETECTOR 0.1 - 3.9 GHz

v05.0309
HMC714LP5 / 714LP5E
DUAL RMS POWER DETECTOR
0.1 - 3.9 GHz
12
Electrical Specifications II, T_A = +25°C, VCCA = VCCB = VCCBIAS = 5V, CINT = 0.1 μF
Parameter
Typ.
Typ.
Typ.
Typ.
Typ.
Typ.
Typ.
Typ.
Units
Deviation vs Temperature: (Over full temperature range -40°C to 85°C. Deviation is measured from reference, which is CW input at 25°C
Differential Input Interface with 1:1 Balun Transformer (over full input frequency range)
± 0.6
dB
Wideband Single-Ended Input Interface suitable for input signal frequencies below 1000 MHz
± 0.5
dB
Tuned Single-Ended Input Interface Suitable for input signal frequencies above 1000 MHz
± 0.6
dB
Modulation Deviation (Deviation measured from reference, which is measured with CW input at equivalent input signal power,
VTGT=2V)
Input Signal Frequency
100
500
900
1900
2200
3000
3500
3900
MHz
256QAM (2 Mbps, 8dB Crest Factor)
-0.13
-0.1
-0.1
-0.1
-0.1
-0.1
-0.3
-0.3 mV/dB
WCDMA Single Carrier
(Test Model 1 with 64DPCH)
-0.3
-0.2
-0.2
-0.2
-0.2
-0.2
-0.2
-0.2
dBm
WCDMA 2 Carrier
(Test Model 1 with 64DPCH)
-0.5
-0.5
-0.4
-0.4
-0.3
-0.4
-0.4
-0.4
dBm
Modulation Deviation (Deviation measured from reference, which is measured with CW input at equivalent input signal power,
VTGT=1V)
Input Signal Frequency
100
500
900
1900
2200
3000
3500
3900
MHz
256QAM (2 Mbps, 8dB Crest Factor)
0.1
0.1
0.1
0.1
0.1
0.1
-0.2
-0.1
dB
WCDMA Single Carrier
(Test Model 1 with 64DPCH)
-0.1
-0.1
-0.1
-0.1
-0.1
-0.1
-0.1
-0.1
dB
WCDMA 2 Carrier
(Test Model 1 with 64DPCH)
-0.1
-0.1
-0.1
-0.1
-0.1
-0.1
-0.1
-0.1
dB
Differential Input Configuration Logarithmic Slope and Intercept
Input Signal Frequency
100
500
900
1900
2200
3000
3500
3900
MHz
Logarithmic Slope
37.3
37.1
37
36
36
36.1
36.2
38.2 mV/dB
Logarithmic Intercept
-70
-70
-69.5
-72
-71.5 -68.5 -68.5
-64
dBm
Max. Input Power at +-1dB Error
12
14
13
15
15
13
-5
-8
dBm
Min. Input Power at +-1dB Error
-56
-55
-56
-56
-56
-52
-52
-49
dBm
Single Ended Input Configuration Logarithmic Slope and Intercept
Input Signal Frequency
100
900
1800 ± 300
2200 ± 300
3600 ± 300
MHz
Logarithmic Slope
38.2
37.9
36.6
35.4
36.8
mV/dB
Logarithmic Intercept
-67
-67.5
-67
-67
-64.5
dBm
Max. Input Power at +-1dB Error
14
6
15
15
12
dBm
Min. Input Power at +-1dB Error
-56
-56
-56
-54
-49
dBm
iPAR Feature: INS[A,B] outputs follow Amplitude Modulated Envelope Power, scaled to Average (RMS) Signal Power
INS[A,B] and IREF[A,B] are measured with Rext = 3.9 kΩ and 50 kΩ active scope probe
IREF[A,B] Output Voltage
1.6
V
INS[A,B] Output Voltage, with CW Input Signal (EAR = 1: Reference Condition)^[1]
1.6
V
INS[A,B] Scaling Factor (SF) with VTGT = 2V
INS[A,B] Scaling Factor (SF) with VTGT = 1V
INS[A,B] Output: Variation over Temperature (-40C to 85C)
190
mV
95
mV
±2
%
INS[A,B] Output: 3 dB Video BW
35
MHz
[1] EAR: Amplitude Modulated Envelope Signal Power-to-Average (RMS) Signal Power Ratio; EAR = 1 for CW signals
12 - 116
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com