HMC714LP5 Datasheet, PDF (24/40 Pages) Hittite Microwave Corporation – DUAL RMS POWER DETECTOR 0.1 - 3.9 GHz

v05.0309
Evaluation PCB - Differential
HMC714LP5 / 714LP5E
DUAL RMS POWER DETECTOR
0.1 - 3.9 GHz
12
List of Materials for Evaluation PCB 120339 ^[1]
Item
J2, J5, J9, J11,
J13, J14, J16, J18
J3, J4, J6 - J8,
J10, J17, J19 - J25
C1, C2, C5, C6, C9, C28
C3, C8, C10, C29
C4, C7, C11, C26,
C27, C30
R1, R3
R2
R4, R7, R15 - R18, R27
R10, R12, R20, R23
R24
R25
R26
Description
SMA Connector
DC Pin
1 nF Capacitor, 0402 Pkg.
100 pF Capacitor, 0402 Pkg.
100 nF Capacitor, 0402 Pkg.
68.1 Ohm Resistor, 0402 Pkg.
10K Ohm Resistor, 0402 Pkg.
0 Ohm Resistor, 0402 Pkg.
3.92K Ohm Resistor, 0402 Pkg.
61.9K Ohm Resistor, 0402 Pkg.
33K Ohm Resistor, 0402 Pkg.
1K Ohm Resistor, 0402 Pkg.
Item
T1, T2
U1
PCB ^[2]
Description
Transformer, E-Series RF 1:1,
HMC714LP5(E) Differential
Dual RMS Power Detector
120336 Evaluation PCB
The circuit board used in the final application should
use RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown. A
sufficient number of via holes should be used to con-
nect the top and bottom ground planes. The evalua-
tion circuit board shown is available from Hittite upon
request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
12 - 137