HMC714LP5 Datasheet, PDF (22/40 Pages) Hittite Microwave Corporation – DUAL RMS POWER DETECTOR 0.1 - 3.9 GHz

v05.0309
HMC714LP5 / 714LP5E
DUAL RMS POWER DETECTOR
0.1 - 3.9 GHz
Evaluation PCB - Wideband Single-Ended
12
List of Materials for Evaluation PCB 121864 ^[1]
Item
Description
J2, J5, J9, J11,
J13, J14, J16, J18
SMA Connector
J3, J4, J6 - J8,
J10, J17, J19 - J25
DC Pin
C1, C2, C5, C6, C9, C28
1 nF Capacitor, 0402 Pkg.
C3, C8, C10, C29
100 pF Capacitor, 0402 Pkg.
C4, C7, C11, C26, C27, C30 100 nF Capacitor, 0402 Pkg.
R1, R3
68 Ohm Resistor, 0402 Pkg.
R2
10K Ohm Resistor, 0402 Pkg.
R4, R7, R15 - R18, R27,
R31, R34
0 Ohm Resistor, 0402 Pkg.
R10, R12, R20, R23
3.92K Ohm Resistor, 0402 Pkg.
R24
61.9K Ohm Resistor, 0402 Pkg.
R25
33K Ohm Resistor, 0402 Pkg.
R26
1K Ohm Resistor, 0402 Pkg.
Item
U1
PCB ^[2]
Description
HMC714LP5(E) Single-Ended
Dual RMS Power Detector
121862 Evaluation PCB
The circuit board used in the final application should
use RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown. A
sufficient number of via holes should be used to con-
nect the top and bottom ground planes. The evalua-
tion circuit board shown is available from Hittite upon
request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
12 - 135