FX11LA-80S-8-SV71 Datasheet, PDF (9/20 Pages) Hirose Electric – 0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections

FX11 Seriesq0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
Stacking height : 2.5mm, 3mm
sProduct Specifications
Rated current 0.3 A (Note 1) Operating temperature range -55 to 85ç
Storage temperature range -10 to +60ç (Note 2)
Rating Rated voltage 50 V AC
Operating humidity range Relative humidity 95% or less Storage humidity range -40 to -70% (Note 2)
(No condensation)
Item
1. Insulation resistance
2. Voltage proof
3. Contact resistance
4. Vibration
Requirements
100 Mø or greater
No flashover or breakdown
70 mø or less
No electrical discontinuity for 1µs or greater
No damage, cracks, or parts looseness
Conditions
Measured at 100 V DC
150 V AC applied for one minute
Measured at 100 mA
Frequency: 10 to 55 Hz, amplitude of 0.75 mm in 3 directions,
10 cycles each
5. Shock
No electrical discontinuity for 1µs or longer
No damage, cracks, or parts looseness
Acceleration of 490 m/s², 11ms duration, sine half-wave
waveform,for 3 cycles in the both directions of each of the 3 axes
6. Damp heat
(Steady state)
7. Temperature cycle
Contact resistance of 80 mø or less, insulation resistance of
100 Mø or greater, no damage, cracks, or parts looseness
Contact resistance of 80 mø or less, insulation resistance of
100 Mø or greater, no damage, cracks, or parts looseness
Temperature of 40ç, humidity of 90 to 95%, duration 96 h
Temperature: -55ç ¡ 15 to 35ç ¡ 85ç ¡ 15 to 35ç
Time: 30 min. ¡ 2 to 3 min. ¡ 30 min. ¡ 2 to 3 min. for 5 cycles
8. Durability
Contact resistance of 80 mø or less
No damage, cracks, or parts looseness
50 times
9. Resistance to
soldering heat
No melting of resin portion which affects performance
Reflow: At the recommended temperature profile
Soldering iron temperature: 360ç for 5 seconds
Note 1: The term storage refers to an unused products prior to board mounting (including packing materials) that is being kept for a long period.
The operating temperature and humidity range are applied to the non-conducting condition following board assembly.
Note 2: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for
a specific part number shown.
sMaterials
Part
Insulator
Contacts
Ground plate
Metal fitting
Metal plate
Material
LCP
Copper alloy
Phosphor bronze
Phosphor bronze
Phosphor bronze
Beige
Header
Receptacle
Tin plating
Tin plating
Finish
Engagement Area: Gold plating of 0.1µm
Termination Area: Flash plating
Remarks
UL94V-0
----------
----------
----------
----------
sOrdering information
Type With Ground Plate FX11 # ^- π P / π - SV 0.5 ⁽✽ ✽⁾
1
2
4
5
6
7
3
Type Without Ground Plate FX11 # ^- π P - SV 0.5 ⁽✽ ✽⁾
1
2
34
1 Series name : FX11
2 Form Symbol A : With guide post
B : Without guide post
3 Number of contacts Type with ground plate
Signal/Ground:60/6,
80/8, 100/10
Type without ground
Signal: 80, 100
5
6
7
4 ^{Connector type}
P : Header
S : Receptacle
5 Contact form
SV : Straight SMT
6 Product height
Blank: Standard
0.5 : Standard + 0.5mm
7 Blank, (71): Tray packaging (Without pick-and-place tape)
(21),(91): Embossed tape packaging (Without pick-and-place tape)
(22),(92): Embossed tape packaging (With pick-and-place tape)
9