FX11LA-80S-8-SV71 Datasheet, PDF (10/20 Pages) Hirose Electric – 0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections

FX11 Seriesq0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
sHeader with ground plate
q 2.5mm stacking height
(0.5 )
A±0.2
0.5 ±0.05
0.2 ±0.05
(0.75) (0.75)
(6)
B ±0.2
C±0.3
Part Number
FX11A- 60P/06-SV(71)
FX11A- 80P/08-SV(71)
FX11A-100P/10-SV(71)
FX11B- 60P/06-SV(71)
FX11B- 80P/08-SV(71)
FX11B-100P/10-SV(71)
CL No.
573-0502-0-71
573-0503-2-71
573-0504-5-71
573-0512-3-71
573-0513-6-71
573-0514-9-71
Number of contacts
A
Signal Ground
60
6 17.5
80
8 23.5
100
10 29.5
60
6 17.5
80
8 23.5
100
10 29.5
2-( Ø0.8 )
D±0.1
Guidepost
Unit : mm
BCDE F
Remarks
RoHS
12 22.6 18 19.4 25.5
18 28.6 24 25.4 31.5 ^{With guideposts}
24 34.6 30 31.4 37.5
YES
12 22.6 ---------- 19.4 25.5
18 28.6 ---------- 25.4 31.5 ^{Without guideposts}
24 34.6 ---------- 31.4 37.5
[Specifications number] – **, (**)
(71): Tray packaging (Without pick-and-place tape)
(91) : Embossed tape packaging (Without pick-and-place tape)
(92) : Embossed tape packaging (With pick-and-place tape)
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
4 F min
Recommended metal mask thickness: 0.15 mm
C +0.1
0
E⁰
D±0.05
A ±0.05
0.5 ±0.03
0.75 ±0.03 0.75 ±0.03
3 _{Ø0.9 ±0.05}
0.25 ±0.05
3 ±0.05
1 6 ±0.05 0.7±0.03 (Land)
0.6±0.03(Metal mask)
B±0.05
Ø1±0.05 3
0.3±0.03(Land)
0.25±0.03(Metal mask)
Note 1 Cross-hatched portions, totaling n places, indicate the ground circuits.
2 The cross-hatched area inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
3 _{Not required in products without guideposts.}
4 _{Do not mount a part other than this product in the area of . Doing so will prevent the engagement}
of this and the mating connector.
10