FX11LA-80S-8-SV71 Datasheet, PDF (6/20 Pages) Hirose Electric – 0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections

FX11 Seriesq0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
sReceptacle with ground Plate
q 2mm stacking height
(0.5)
A±0.2
0.5±0.05
0.2±0.05
(0.75)
(0.75)
(6)
B±0.2
C±0.3
2-(Ø0.8)
D±0.1
Guidepost
Unit : mm
Part Number
CL No.
Number of contacts
AB
Signal Ground
FX11LA-060S/06-SV(71) ^{573-0102-1-71}
60
6 17.5 12
FX11LA-080S/08-SV(71) ^{573-0103-4-71}
80
8 23.5 18
FX11LA-100S/10-SV(71) ^{573-0104-7-71} 100
10 29.5 24
FX11LA-120S/12-SV(71) ^{573-0105-0-71} 120
12 35.5 30
FX11LB-060S/06-SV(71) ^{573-0112-5-71}
60
6 17.5 12
FX11LB-080S/08-SV(71) ^{573-0113-8-71}
80
8 23.5 18
FX11LB-100S/10-SV(71) ^{573-0114-0-71} 100
10 29.5 24
FX11LB-120S/12-SV(71) ^{573-0115-3-71} 120
12 35.5 30
CDE F
Remarks
RoHS
25 20.8 25.4 22.2
31 26.8 31.4 28.2
With guideposts
37 32.8 37.4 34.2
43 38.8 43.4 40.2
YES
25 ---------- 25.4 22.2
31 ---------- 31.4 28.2
Without guideposts
37 ---------- 37.4 34.2
43 ---------- 43.4 40.2
[Specifications number] – **, (**)
(71): Tray packaging (Without pick-and-place tape)
(91) : Embossed tape packaging (Without pick-and-place tape)
(92) : Embossed tape packaging (With pick-and-place tape)
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
0.5±0.03
E^+00.1
F
0
-- 0.1
D±0.05
A±0.05
0.75±0.03
0.75±0.03
2
4 Ø0.9±0.05
1.65±0.05
1 6±0.05
0.7±0.03(Land)
4.4±0.05
0.6±0.03(Metal mask)
B±0.05
Ø1±0.05 4
0.3±0.03(Land)
0.25±0.03(Metal mask)
Note 1 Cross-hatched portions, totaling n places, indicate the ground circuits.
2 _{Cross-hatched portions, 2 places on both sides, indicate the metal fittings.}
3 _{The cross-hatched area inside the SMT land may come into contact with the connector contacts}
and thus care should be taken that the pattern does not extend beyond the SMT land width.
4 _{Not required in products without guideposts.}
6