FX11LA-80S-8-SV71 Datasheet, PDF (4/20 Pages) Hirose Electric – 0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections

FX11 Seriesq0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
Stacking height : 2mm
sProduct Specifications
Rated current 0.3 A (Note 1) Operating temperature range -55 to 85ç
Storage temperature range -10 to +60ç (Note 2)
Rating Rated voltage 50 V AC
Operating humidity range Relative humidity 95% or less Storage humidity range -40 to -70% (Note 2)
(No condensation)
Item
1. Insulation resistance
2. Voltage proof
3. Contact resistance
4. Vibration
5. Shock
6. Damp heat
(Steady state)
7. Temperature cycle
8. Durability
9. Resistance to
soldering heat
Requirements
100 Mø or greater
No flashover or breakdown
60 mø or less
No electrical discontinuity for 1µs or greater
No damage, cracks, or parts looseness
Conditions
Measured at 100 V DC
150 V AC applied for one minute
Measured at 100 mA
Frequency: 10 to 55 Hz, amplitude of 0.75 mm in 3 directions,
10 cycles each
No electrical discontinuity for 1µs or longer
No damage, cracks, or parts looseness
Acceleration of 490 m/s², 11ms duration, sine half-wave
waveform,for 3 cycles in the both directions of each of the 3 axes
Contact resistance of 70 mø or less, insulation resistance of
100 Mø or greater, no damage, cracks, or parts looseness
Temperature of 40ç, humidity of 90 to 95%, duration 96 h
Contact resistance of 70 mø or less, insulation resistance of Temperature: -55ç ¡ 15 to 35ç ¡ 85ç ¡ 15 to 35ç
100 Mø or greater, no damage, cracks, or parts looseness Time: 30 min. ¡ 2 to 3 min. ¡ 30 min. ¡ 2 to 3 min. for 5 cycles
Contact resistance of 70 mø or less
No damage, cracks, or parts looseness
50 times
No melting of resin portion which affects performance
Reflow: At the recommended temperature profile
Soldering iron temperature: 360ç for 5 seconds
Note 1: The term storage refers to an unused products prior to board mounting (including packing materials) that is being kept for a long period.
The operating temperature and humidity range are applied to the non-conducting condition following board assembly.
Note 2: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for
a specific part number shown.
sMaterials
Part
Material
Finish
Insulator
LCP
Beige
Contacts
Copper alloy
Phosphor bronze
Header
Receptacle
Engagement Area: Gold plating of 0.1µm
Termination Area: Flash plating
Ground plate
Phosphor bronze
Tin plating
Metal fitting
Metal plate
Phosphor bronze
Tin plating
sOrdering information
Type With Ground Plate FX11L # ^- π P - / π - SV ⁽✽ ✽⁾
Remarks
UL94V-0
----------
----------
----------
----------
1
2
4
5
6
3
Type Without Ground Plate FX11L # ^- π P - SV ⁽✽ ✽⁾
1
2
34
5
6
1 Series name : FX11L
4 Connector type
2 Form Symbol A : With guide post
P : Header
B : Without guide post
S : Receptacle
3 Number of contacts Type with ground plate
5 Contact form
Signal/Ground:60/6, 80/8,
SV : Straight SMT
100/10, 120/12
6 Blank, (71): Tray packaging (Without pick-and-place tape)
Type without ground
(21),(91): Embossed tape packaging (Without pick-and-place tape)
Signal: 68, 92, 116, 140
(22),(92): Embossed tape packaging (With pick-and-place tape)
4