FH41-50S-0.5SH Datasheet, PDF (7/9 Pages) Hirose Electric – 0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded FFC

FH41 Series●0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded FFC
■Temperature Profile
Temperature (ç)



ˆ
ˆ
."9
ˆ
ˆ
HRS test condition
Solder method
Environment
Solder composition
Test board
Land dimensions
Metal mask
:Reflow, IR/hot air
:Room air
:Paste, 96.5%Sn/3.0%Ag/0.5%Cu
(Senju Metal Industry, Co., Ltd.'s Part
Number:M705-221CM5-32-10.5)
:Glass epoxy 30mm×60mm×0.8mm thick
:0.3mm×0.65mm, 0.3mm×1.2mm
:0.25×0.65, 0.2×0.1mm thick


ˆʢ_60sec.ʣ

Start
90~120sec.
Preheating
Ê¢60sec.Ê£
soldering
Time(Seconds)
The temperature profiles shown are based on the above conditions.
In individual applications the actual temperature may vary,
depending on solder paste type, volume / thickness and board size /
thickness. Consult your solder paste and equipment manufacturer for
specific recommendations.
7