FH41-50S-0.5SH Datasheet, PDF (1/9 Pages) Hirose Electric – 0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded FFC

0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded FFC
FH41 Series
THine Electronics, Inc.
Next-generation chipset (V-by-One^®HS*)
Compatible connector
ˎHigh-speed serial interface technology
ɹfor image transmission
■Features
1.Compatibility with impedance control, shield
FFC
The FH41 series is equipped with a GND exclusive terminal
and available for connection with impedance control, shield
FFC.
2.Differential impedance 100Ω±10%
The FH41 series features a terminal design considering
impedance control, and making high speed transmission
possible.
3.Highly reliable connection, tough structure
The FH41 series follows the structure of the proven FH28
series, and achieves:
- High reliability thanks to the FFC positioning mechanism
- Reliable connection operation and no unlocking thanks to the
durable structure.
4.One-finger operation of the actuator
Proven (in several other Hirose's connectors!) Flip-Lock
rotating actuator assures reliable mechanical and electrical
connection with FPC, confirming it with a definite tactile feel.
5.Board placement with automatic equipment
Flat upper surface and tape and reel packaging facilitate
vacuum pick-up and placement.
Standard reel packaging contains 2,500 connectors.
6.Halogen-free ^*
*As defined by IEC61249-2-21
Br-900ppm maximum, Cl-900ppm maximum,
Cl + Br combined-1,500ppm maximum
Space saving (68 pos. shown)
2.5mm
38mm
figure.1
6.2mm
0.S5imgnmalpcitocnhtact
figure.2
2.G5rmomunpditccohntact
Signal
contact
connection area
''$
figure.3 ^{GND contact connection area}
2010.9
1