FH41-50S-0.5SH Datasheet, PDF (2/9 Pages) Hirose Electric – 0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded FFC

FH41 Series●0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded FFC
■Specifications
Ratings
Current rating 0.5 A(Note1)
Voltage rating 50 Vrms AC
Operating temperature range:
-40 to +85°C (Note 2)
Operating humidity range:
Relative humidity 90% max. (No condensation)
Storage temperature range:
-10 to +50°C (Note 3)
Storage humidity range:
Relative humidity 90% max. (No condensation)
Recommended FPC Thickness 0.3 ±0.05 mm, Gold plated contact pads (GND plate:t=0.5±0.05mm,tin　plateing)
Item
Specification
Conditions
1.Insulation
resistance
500 Mø min.
100 V DC
2.Withstanding voltage No flashover or insulation breakdown
150 Vrms AC / one minute
3.Contact resistance
100 mø max.
* Including FFC conductor resistance
1 mA, AC max (AC: 1kHz)
4.Durability
Contact resistance: 100 mø max.
No damage, cracks, or parts dislocation
20 cycles
5.Vibration
No electrical discontinuity of 1μs or longer
Contact resistance: 100 mø max.
No damage, cracks, or parts dislocation
Frequency: 10 to 55 Hz, single amplitude of 0.75mm,
10 cycles in each of the 3 directions
6.Shock
No electrical discontinuity of 1μs or longer
Contact resistance: 100 mø max.
No damage, cracks, or parts dislocation
Acceleration of 981m/s² 6 ms duration, sine halfwave,
3 cycles in each of the 3 axis
7.Humidity
(Steady state)
Contact resistance: 100 mø max.
Insulation resistance: 50 Mø min.
No damage, cracks, or parts dislocation
96 hours at 40°C and humidity of 90 to 95%
8.Temperature cycle
Contact resistance: 100 mø max.
Insulation resistance: 50 Mø min.
No damage, cracks, or parts dislocation
Temperature : -40°C → +15°C to +35°C → +85°C →
+15°C to +35°C
Time: 30 → 2 to 3 → 30 → 2 to 3 minutes
5 cycles
9.Resistance to
soldering heat
No deformation of components affecting performance
Reflow: At the recommended temperature profile
Manual soldering: 350°C ±5°C for 5 seconds
Note 1. When passing the current through all of the contacts, use 70% of the rated current.
Note 2. Includes temperature rise caused by current flow.
Note 3. T he term "storage" refers to products stored for a long period prior to mounting and use.
The operating temperature and humidity range covers the non-conducting condition of installed connectors in storage, shipment or
during transportation after board mounting.
Note 4. Information contained in this catalog represents general requirements for this Series.
Contact us for the drawings and specifications for a specific part number shown.
■Materials
Part
Insulator
Contacts
Metal fittings
Material
LCP
Phosphor bronze
Brass
Finish
Color:Gray
Color:Black
Gold plated
Pure tin reflow plated
Remarks
UL94V-0
---------
■Ordering information
FH 41 − 50S − 0.5 SH ⁽⁰⁵⁾
❶
❷
❸
❹
❺
❻
❶ Series name : FH
❷ Series No.: 41
❸ Number of positions : 28 to 68
❹ Contact pitch : 0.5mm
❺ SH : SMT horizontal mounting type
❻ Plating specifications :(05)…Gold plated
2