FH39-25S-0.3SHW Datasheet, PDF (2/11 Pages) Hirose Electric – 0.3 mm Pitch, 1.2 mm above the board, Top and bottom Contact, Back-Flip actuator

FH39 Seriesq0.3 mm Pitch, 1.2 mm above the board, Top and bottom Contact, Back-Flip actuator Flexible Printed Circuit ZIF Connectors
sSpecifications
Ratings
Current rating 0.2 A
Voltage rating 30 Vrms AC
Operating
temperature range
-55 to +85°C (Note 1)
Storage
temperature range
-10 to +50°C (Note 2)
Operating
Relative humidity 90% max. Storage
Relative humidity 90% max.
humidity range (No condensation)
humidity range (No condensation)
Recommended FPC
Thickness: 0.2 ± 0.03 mm, Gold plated contact pads
Item
Specification
Conditions
1.Insulation resistance 50 Mø min.
2.Withstanding voltage No flashover or insulation breakdown
100 V DC
90 Vrms AC / 1 minute
3.Contact resistance
100 mø max.
* Including FPC and FFC conductor resistance
1 mA, AC max (AC: 1kHz)
4.Durability
Contact resistance: 100 mø max.
No damage, cracks, or parts dislocation
10 cycles
5.Vibration
No electrical discontinuity of 1µs or longer
Contact resistance: 100 mø max.
No damage, cracks, or parts dislocation
Frequency: 10 to 55 Hz,
single amplitude of 0.75 mm,
10 cycles in each of the 3 axis
6.Shock
No electrical discontinuity of 1µs or longer
Contact resistance: 100 mø max.
No damage, cracks, or parts dislocation
Acceleration of 981m/s², 6 ms duration,
sine half-wave, 3 cycles in each of the 3 axis
7.Humidity
(Steady state)
8.Temperature cycle
Contact resistance: 100 mø max.
Insulation resistance: 50 Mø min.
No damage, cracks, or parts dislocation
Contact resistance: 100 mø max.
Insulation resistance: 50 Mø min.
No damage, cracks, or parts dislocation
96 hours at 40ç and humidity of 90 to 95%
Temperature:-55ç➝+15ç to +35ç➝+85ç➝+15ç to +35ç
Time: 30➝ 2 to 3 ➝ 30➝ 2 to 3 minutes
5 cycles
9.Resistance to
soldering heat
No deformation of components affecting
performance
Reflow: At the recommended temperature profile
Manual soldering: 350ç ± 5ç for 5 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for a long period prior to mounting and use.
The operating temperature and humidity range covers the non-conducting condition of installed connectors in storage,
shipment or during transportation after board mounting.
Note 3: Information contained in this catalog represents general requirements for this Series.
Contact us for the drawings and specifications for a specific part number shown.
sMaterials
Part
Insulator
Contacts
Metalfittings
Material
LCP
PA
Phosphor bronze
Finish
Color:Beige
Color:Black
Gold plated
Pure tin reflow plated
Remarks
UL94V-0
-----------------
-----------------
sOrdering information
FH 39 J - 51S - 0.3 SHW (10)
1
23
4
5
6
7
1 Series name:FH
2 Series No.:39
3 Blank :Standard
A :Long actuator type
J :Halogen-free requirements
(Flame retardance UL94V-0).
4 Number of positions
FH39 :25 to 61
FH39A :67, (71 under planning)
FH39J :25 to 51
5 Contact pitch:0.3mm
6 Termination type
SHW...SMT horizontal staggered row mount type
7 Plating specifications
(10)...Gold plating with nickel barrier
2