FH39-25S-0.3SHW Datasheet, PDF (10/11 Pages) Hirose Electric – 0.3 mm Pitch, 1.2 mm above the board, Top and bottom Contact, Back-Flip actuator

FH39 Seriesq0.3 mm Pitch, 1.2 mm above the board, Top and bottom Contact, Back-Flip actuator Flexible Printed Circuit ZIF Connectors
Operation
3. Locking
After FPC/FFC insertion, rotate the actuator down to a full stop, pushing it at the center.
Rotate
Excessive force after the actuator is already closed
Push at the center of the actuator.
Do NOT close at the ends.
4. FPC removal (Lock release)
Carefully rotate the actuator up to 90°, lifting it at the center.
Rotate (lift)
Do not attempt to open more than 90°
Lift at the center
Do not open (lift) at one end.
* The actuator opens by rotating it in the direction OPPOSITE to the direction of the insertion of the FPC.
DO NOT attempt to open it from the same side as the insertion of the FPC.
10