FH39-25S-0.3SHW Datasheet, PDF (1/11 Pages) Hirose Electric – 0.3 mm Pitch, 1.2 mm above the board, Top and bottom Contact, Back-Flip actuator

NEW
0.3 mm Pitch, 1.2 mm above the board, Top and bottom Contact,
Back-Flip actuator Flexible Printed Circuit ZIF Connectors
FH39 Series
qSmall size (39 pos. shown)
13.9mm(39 _pos.)
1.1mm
3.45mm
sFeatures
1. Low-profile 0.3mm pitch connector with top
and bottom contact
Usable via either its top or bottom contact point, this
connector achieves enhanced freedom in terms of the
product design.
2. High contact reliability thanks to the spring
terminal structure
Because both top and bottom contact points are spring-
loaded, the contact point adapts to the FPC motion, and
high contact reliability is ensured.
3. Delivered with the actuator open
FPC can be immediately inserted without the need for the
opening of the actuator.
4. Easy FPC insertion
Entry chamfers at all sides of the FPC insertion slot assure
correct insertion and positioning of the FPC.
5. Accepts standard FPC thickness
0.2mm thick standard Flexible Printed Circuit (FPC) can be
used. This is the only ultra-low profile ZIF connector using
standard FPC.
6. Conductive traces on the PCB can run under
the connector
No exposed contacts on the bottom of the connector.
7. Board placement with automatic equipment
Flat upper surface and tape and reel packaging facilitate
vacuum pick-up and placement.
Standard reel packaging contains 5000 connectors.
8. Halogen-free^*
(FH39J Series)
*As defined by IEC61249-2-21
Br-900ppm maximum, Cl-900ppm maximum,
Cl + Br combined-1,500ppm maximum
qEasy FPC insertion
actuator
FPC
qCompletely locked
2010.9
1