HMNR28D Datasheet, PDF (2/13 Pages) Hanbit Electronics Co.,Ltd – 5.0 or 3.3V, 16K bit (2 Kbit x 8) TIMEKEEPER NVSRAM

HANBit
HMNR28D(V)
FUNCTIONAL DESCRIPTION
The HMNR28D(V) is a full function, year 2000 compliant (Y2KC), real– time clock/calendar (RTC) and 2k x 8 non-volatile
static RAM. User access to all registers within the HMNR28D(V) is accomplished with a bytewide interface . The Real-
time clock (RTC) information and control bits reside in the sixteen upper most RAM locations. The RTC registers contain
century, year, month, date, day, hours, minutes, and seconds data in 24-hour BCD format. Corrections for the date of
each month and leap year are made automatically. The RTC clock registers are double buffered to avoid access of
incorrect data that can occur during clock update cycles. The double buffered system also prevents time loss as the
timekeeping countdown continues unabated by access to time register data.
The HMNR28D(V) also contains its own power-fail circuitry which deselects the device when the VCC supply is in an out of
tolerance condition. This feature prevents loss of data from unpredictable system operation brought on by low VCC as
errant access and update cycles are avoided.
BLOCK DIAGRAM
32.768KHz
CRYSTAL
LITHIUM
CELL
OSCILLATOR AND
CLOCK CHAIN
16 x 8
TIMEKEEPER
REGISTER
POWER
VOLTAGE SENSE
AND
SWITCHING
CIRCURITY
VPFD
2,032 x 8
SRAM ARRAY
A0 ~ A10
DQ0 ~ DQ7
/CE
/WE
/OE
A0-A10 : Address Input
/CE : Chip Enable
Vss : Ground
DQ0-DQ7 : Data In / Data Out
Vcc
Vss
/WE : Write Enable
/OE : Output Enable
VCC : Power (+5V or +3.3V)
NC : No Connection
URL : www.hbe.co.kr
Rev. 0.0 (March, 2002)
2
HANBit Electronics Co.,Ltd.