S10200-02 Datasheet, PDF (11/11 Pages) Hamamatsu Corporation – Back-thinned TDI-CCD Operating the back-thinned CCD in TDI mode delivers high sensitivity.

Back-thinned TDI-CCD S10200-02, S10201-04, S10202-08, S10202-16
s Precaution for use (Electrostatic countermeasures)
q Handle these sensors with bare hands or wearing cotton gloves. In addition, wear anti-static clothing or use a wrist band with
an earth ring, in order to prevent electrostatic damage due to electrical charges from friction.
q Avoid directly placing these sensors on a work-desk, etc. that may carry an electrostatic charge.
q Provide ground lines or ground connection with the work-floor, work-desk and work-bench to allow static electricity to
discharge.
q Ground the tools used to handle these sensors, such as tweezers and soldering irons.
It is not always necessary to provide all the electrostatic measures stated above. Implement these measures according to the
amount of damage that occurs.
TDI camera C10000 series
The TDI camera C10000 series is useful in
a wide range of imaging applications that
require both high speed and high sensitiv-
ity, including in-line monitoring and inspec-
tion.
s Specifications
Parameter
C10000-301
C10000-401
Pixel number
1024 (H) × 128 (V)
2048 (H) × 128 (V)
Device structure
Back-thinned type
Pixel size
12 µm (H) × 12 µm (V)
Effective area
12.29 mm (H) × 1.536 mm (V) 24.58 mm (H) × 1.536 mm (V)
TDI transfer direction
Bi direction
Readout mode
TDI readout mode or Frame readout mode *⁹
TDI output channel
2 ports (512 × 2)
4 ports (512 × 4)
Anti-blooming
Lateral overflow drain (× 100)
TDI pixel clock rate
30 MHz
TDI line rate
0.45 kHz to 50 kHz
Full-well capacity (Typ.)
100000 electrons
Readout noise (Typ.)
130 electrons rms
Dynamic range (Typ.)
770 : 1
A/D converter
12-bit / 8-bit *¹⁰
Image processing
Real-time shading correction with internal DSP
Lens mount
C-mount
F-mount
Interface
Base configuration
Camera output clock
60 MHz
Camera output channel
1 port (1024 × 1)
2 ports (1024 × 2)
TDI line rate control
Internal setting by serial command *¹¹
External trigger
Analog enhancement gain
0 dB to 14 dB
Power /
Power consumption
DC +12 V / 20 V · A
Camera control
Serial control in Camera link
*9: Frame readout mode is useful for easy focusing, but it is not suitable for
measurement.
Please consult with our sales office for details.
*10: Selectable by serial command.
*11: Internal TDI line rate can be set in 33 ns steps.
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2007 Hamamatsu Photonics K.K.
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Hamamatsu City, 435-8558 Japan, Telephone: [phone], Fax: [phone], www.hamamatsu.com
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: [phone], Fax: [phone]
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: [phone], Fax: [phone]
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: [phone], Fax: [phone]
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: [phone], Fax: [phone]
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: [phone], Fax: [phone]
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: [phone], Fax: [phone]
Cat. No. KMPD1098E02
Apr. 2007 DN
11