PIDP-SS Datasheet, PDF (5/6 Pages) Gamewell-FCI by Honeywell – Monitor Modules with SmartScan

WIRING DIAGRAMS
THIS PAGE: PIDP-SS
• Connect modules to listed compatible Gamewell control panels only.
• All wiring shown is supervised and power limited.
• Install contact closure devices per manufacturers’ installation instructions.
• Any number of UL-listed contact closure devices may be used.
• DO NOT MIX fire alarm initiating, supervisory, or security devices on the
same circuit.
Fig. 3 PIDP-SS: Typical two-wire initiating device circuit configuration, NFPA Style B.
6720wir2.wmf
Fig. 4 PIDP-SS: Typical four-wire fault-tolerant initiating circuit configuration, NFPA Style D.
6720wir3.wmf
Fig. 5 PIDP-SS: Typical two-wire initiating circuit configuration for security systems
(with alarm versus short capability).
PIDP-SS, PID-SS, CZI-SS, DPID-SS CS-2465 09/01/06
6720wir4.wmf
Page 5 of 6