PIDP-SS Datasheet, PDF (4/6 Pages) Gamewell-FCI by Honeywell – Monitor Modules with SmartScan

Wiring Diagrams
The following wiring diagrams are included:
1) DPID-SS, typical dual two-wire Style B initiating device circuit configuration.
2) PID-SS, typical two-wire Style B initiating device circuit configuration.
3) PIDP-SS, typical two-wire initiating circuit configuration, NFPA Style B.
4) PIDP-SS, typical four-wire fault-tolerant initiating circuit configuration, NFPA Style D.
5) PIDP-SS, typical two-wire initiating circuit configuration for security systems
(with alarm versus short capability).
6) CZI-SS, interface two-wire conventional detectors, NFPA Style B.
7) CZI-SS, interface two-wire conventional detectors, NFPA Style D.
Fig. 1
DPID-SS: Typical dual two-wire
Style B initiating device circuit
configuration.
WIRING DIAGRAM: DPID-SS
g2465w1.wmf
Fig. 2
PID-SS: Typical two-wire
Style B initiating device
circuit configuration.
WIRING DIAGRAM: PID-SS
g2465w2.wmf
Page 4 of 6
PIDP-SS, PID-SS, CZI-SS, DPID-SS CS-2465 09/01/06