MB15E03SLPFV1-G-BND-6E1 Datasheet, PDF (5/32 Pages) Fujitsu Component Limited. – Single PLL Frequency Synthesizers with On-Chip Prescalers

Single PLL Frequency Synthesizers with On-Chip Prescalers
Absolute Maximum Ratings
Parameter
Power supply voltage
Input voltage
Output voltage
Storage temperature
Symbol
V_CC
V_P
V_I
V_O
V_O
Tstg
Condition
–
–
–
Except Do
Do
–
Rating
Min.
Max.
–0.5
4.0
V_CC
6.0
–0.5
V_CC +0.5
GND
V_CC
GND
V_P
–55
+125
Unit
Remark
V
V
V
V
V
°C
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current, temperature, etc.) in excess of absolute maximum ratings. Do not exceed these
ratings.
Recommended Operating Conditions
Parameter
Power supply voltage
Input voltage
Operating temperature
Value
Symbol
Unit
Min.
Typ.
Max.
V_CC
2.4
3.0
3.6
V
V_P
V_CC
–
5.5
V
V_I
GND
–
V_CC
V
Ta
–40
–
+85
°C
Remark
WARNING: Recommended operating conditions are normal operating ranges for the semiconductor device. All the device’s electrical characteristics are warranted when operated within these
ranges. Always use semiconductor devices within the recommended operating conditions. Operation outside these ranges may adversely affect reliability and could result in
device failure. No warranty is made with respect to uses, operating conditions, or combinations not represented on the data sheet. Users considering application outside the listed
conditions are advised to contact their Fujitsu representative beforehand.
Handling Precautions
• This device should be transported and stored in anti-static containers.
• This is a static-sensitive device; take proper anti-ESD precautions. Ensure that personnel and equipment are properly grounded.
Cover workbenches with grounded conductive mats.
• Always turn the power supply off before inserting or removing the device from its socket.
• Protect leads with a conductive sheet when handling or transporting PC boards with devices.
4 Fujitsu Microelectronics, Inc.