MB15C03 Datasheet, PDF (5/24 Pages) Fujitsu Component Limited. – Single Serial Input PLL Frequency Synthesizer On-Chip prescaler

MB15C03
s ABSOLUTE MAXIMUM RATINGS
Parameter
Power supply voltage
Input voltage
Output voltage
Output current
Operating temperature
Storage temperature
Symbol
VDD
VP
VIN
VOUT
VOUTP
IOUT
Ta
Tstg
Rating
Min.
Max.
GND –0.5
+2.0
GND –0.5
+5.0
GND –0.5
VDD +0.5
GND –0.5
VDD +0.5
GND –0.5
VP +0.5
–10
+10
–20
+60
–40
+125
Unit
Remark
V
V
V
V
V
mA
°C
°C
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
s RECOMMENDED OPERATING CONDITIONS
Parameter
Power supply voltage
Input voltage
Operating temperature
Symbol
VDD
VP
VIN
Ta
Min.
1.0
1.2
2.0
GND
–20
Value
Typ.
—
—
—
—
—
Max.
1.5
1.5
3.5
VDD
+60
Unit
Remark
V
For 90 MHz
For 120 MHz
V
V
°C
WARNING:
Recommended operating conditions are normal operating ranges for the semiconductor device. All
the device’s electrical characteristics are warranted when operated within these ranges.
Always use semiconductor devices within the recommended operating conditions. Operation outside
these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representative beforehand.
HandIing Precautions
• This device should be transported and stores in anti-static containers.
• This is a static-sensitive device; take proper anti-ESD precautions. Ensure that personnel and equipment are
properly grounded. Cover workbenches with grounded conductive mats.
• Always turn the power supply off before inserting or removing the device from its socket.
• Protect leads with a conductive sheet when handling or transporting PC boards with devices.
5