MB15F02SL Datasheet, PDF (13/25 Pages) Fujitsu Component Limited. – Dual Serial Input PLL Frequency Synthesizer

s PHASE COMPARATOR OUTPUT WAVEFORM
frIF/frRF
fpIF/fpRF
LD
tWU
tWL
(FC bit = High)
DOIF/DORF
(FC bit = Low)
DOIF/DORF
MB15F02SL
LD Output Logic Table
IF-PLL section
Locking state/Power saving state
Locking state/Power saving state
Unlocking state
Unlocking state
RF-PLL section
Locking state/Power saving state
Unlocking state
Locking state/Power saving state
Unlocking state
LD output
H
L
L
L
Notes: • Phase error detection range = –2π to +2π
• Pulses on DoIF/RF signals are output to prevent dead zone.
• LD output becomes low when phase error is tWU or more.
• LD output becomes high when phase error is tWL or less and continues to be so for three cycles or more.
• tWU and tWL depend on OSCIN input frequency as follows.
tWU > 2/fosc: i. e. tWU > 156.3 ns when fosc = 12.8 MHz
tWU < 4/fosc: i. e. tWL < 312.5 ns when fosc = 12.8 MHz
13