MB85RS256BPNF-G Datasheet, PDF (1/36 Pages) Fujitsu Component Limited. – 256 K (32 K × 8) Bit SPI

FUJITSU SEMICONDUCTOR
DATA SHEET
Memory FRAM
DS501-00021-2v0-E
256 K (32 K × 8) Bit SPI
MB85RS256B
■ DESCRIPTION
MB85RS256B is a FRAM (Ferroelectric Random Access Memory) chip in a configuration of 32,768
words × 8 bits, using the ferroelectric process and silicon gate CMOS process technologies for forming the
nonvolatile memory cells.
MB85RS256B adopts the Serial Peripheral Interface (SPI).
The MB85RS256B is able to retain data without using a back-up battery, as is needed for SRAM.
The memory cells used in the MB85RS256B can be used for 10¹² read/write operations, which is a significant
improvement over the number of read and write operations supported by Flash memory and E²PROM.
MB85RS256B does not take long time to write data like Flash memories or E²PROM, and MB85RS256B
takes no wait time.
■ FEATURES
• Bit configuration
: 32,768 words × 8 bits
• Serial Peripheral Interface
: SPI (Serial Peripheral Interface)
Correspondent to SPI mode 0 (0, 0) and mode 3 (1, 1)
• Operating frequency
: All commands except READ 33 MHz (Max)
READ command
25 MHz (Max)
• High endurance
: 10¹² times / byte
• Data retention
: 10 years ( + 85 °C), 95 years ( + 55 °C), over 200 years ( + 35 °C)
• Operating power supply voltage : 2.7 V to 3.6 V
• Low power consumption
: Operating power supply current 6 mA (Typ@33 MHz)
Standby current 9 μA (Typ)
• Operation ambient temperature range : -40 °C to +85 °C
• Package
: 8-pin plastic SOP (FPT-8P-M02)
RoHS compliant
Copyright©2012-2013 FUJITSU SEMICONDUCTOR LIMITED All rights reserved
2013.2