MB1504 Datasheet, PDF (1/19 Pages) Fujitsu Component Limited. – ASSP SERIAL INPUT PLL FREQUENCY SYNTHESIZER

DS04–21301–5E
DATA SHEET
MB1504/MB1504H/MB1504L
ASSP SERIAL INPUT PLL FREQUENCY SYNTHESIZER
SERIAL INPUT PLL FREQUENCY SYNTHESIZER
WITH 520MHz PRESCALER
The Fujitsu MB1504/MB1504H/MB1504L, utilizing BI-CMOS technology, is a single chip
serial input PLL frequency synthesizer with pulse-swallow function.
The MB1504 series contains a 520MHz two modulus prescaler that can select either 32/33
or 64/65 divide ratio; control signal generator; 16-bit shift register; 15-bit latch;
programmable reference divider (binary 14-bit programmable reference counter); 1-bit
switch counter; phase comparator with phase inverse function; charge pump; crystal
oscillator; 19-bit shift register; 18-bit latch; and a programmable divider (binary 7-bit
swallow counter and binary 11-bit programmable counter).
The MB1504 operates from a low supply voltage (3V typ) and consumes low power (30mW
at 520MHz).
MB1504 Product Line
V_P Voltage V_OOP Voltage Lock up Time
MB1504
MB1504H
MB1504L
8V max
10V max
8V max
8.5V max
10.0V max
8.5V max
Middle speed
High speed
Low speed
D_O Output
Width
Middle
Low
High
High-level
Output Current
Middle
High
Low
Low-level
Output Current
Middle
Low
High
PLASTIC PACKAGE
DIP-16P-M04
FEATURES
• High operating frequency: f_{IN MAX}=520MHz (V_{IN MIN}=0.20V_P-P)
• On-chip prescaler
• Low power supply voltage: 2.7V to 5.5V (3.0V typ)
• Low power supply consumption: 30mW (3.0V, 520MHz operation)
• Serial input 18-bit programmable divider consisting of:
–Binary 7-bit swallow counter (Divide ratio: 0 to 127)
–Binary 11-bit programmable counter (Divide ratio: 16 to 2047)
• Serial input 15-bit programmable reference divider consisting of:
–Binary 14-bit programmable reference counter (Divide ratio: 8 to 16383)
–1-bit switch counter (SW) Sets divide ratio of prescaler
• 2 types of phase detector output
–On-chip charge pump (Bipolar type)
–Output for external charge pump
• Wide operating temperature: T_A=–40_C to +85_C
PLASTIC PACKAGE
FPT-16P-M06
This device contains circuitry to protect the inputs against
damage due to high static voltages or electric fields. How-
ever, it is advised that normal precautions be taken to avoid
application of any voltage higher than maximum rated volt-
ages to this high impedance circuit.
© Copyright 1994 by FUJITSU LIMIED
1