K10P81M100SF2_11 Datasheet, PDF (56/64 Pages) Freescale Semiconductor, Inc – K10 Sub-Family Data Sheet Supports the following Flash write voltage range: 1.71 to 3.6 V

Dimensions
Table 42. TSI electrical specifications (continued)
Symbol Description
MaxSens2 Maximum sensitivity @ 20 pF electrode
0
MaxSens Maximum sensitivity
Res Resolution
T_Con20 Response time @ 20 pF
I_{TSI_RUN} Current added in run mode
I_{TSI_LP} Low power mode current adder
Min.
0.003
0.003
—
8
—
—
Typ.
0.25
—
—
15
TBD
1
Max.
—
—
16
25
—
TBD
Unit
fF/count
fF/count
bits
μs
μA
μA
Notes
6
7
8
1. The TSI module is functional with capacitance values outside this range. However, optimal performance is not guaranteed.
2. The programmable current source value is generated by multiplying the SCANC[REFCHRG] value and the base current.
3. Measured with a 5 pF electrode, reference oscillator frequency of 10 MHz, PS = 128, NSCN = 8; Iext = 16.
4. Measured with a 20 pF electrode, reference oscillator frequency of 10 MHz, PS = 128, NSCN = 2; Iext = 16.
5. Measured with a 20 pF electrode, reference oscillator frequency of 10 MHz, PS = 16, NSCN = 3; Iext = 16.
6. Measured with a 20 pF electrode, reference oscillator frequency of ~5 MHz (I_REF = 5 μA, REFCHRG = 4), PS = 128,
NSCN = 2; Iext = 16 (EXTCHRG = 15).
7. Typical value depends on the configuration used.
8. Time to do one complete measurement of the electrode. Sensitivity resolution of 0.0133 pF, PS = 0, NSCN = 0, 1
electrode, DELVOL = 2, EXTCHRG = 15.
7 Dimensions
7.1 Obtaining package dimensions
Package dimensions are provided in package drawings.
To find a package drawing, go to http://www.freescale.com and perform a keyword
search for the drawing’s document number:
If you want the drawing for this package
80-pin LQFP
81-pin MAPBGA
Then use this document number
98ASS23174W
98ASA10631D
8 Pinout
K10 Sub-Family Data Sheet Data Sheet, Rev. 4, 3/2011.
56
Preliminary
Freescale Semiconductor, Inc.