K10P81M100SF2_11 Datasheet, PDF (14/64 Pages) Freescale Semiconductor, Inc – K10 Sub-Family Data Sheet Supports the following Flash write voltage range: 1.71 to 3.6 V

General
Table 6. Power consumption operating behaviors (continued)
Symbol Description
Min.
Typ.
Max.
Unit
I_{DD_RUN} Run mode current — all peripheral clocks
enabled, code executing from flash
• @ 1.8V
• @ 3.0V
—
55
TBD
mA
—
56
TBD
mA
I_{DD_RUN_M} Run mode current — all peripheral clocks
AX
enabled and peripherals active, code executing
from flash
• @ 1.8V
—
85
TBD
mA
• @ 3.0V
—
85
TBD
mA
Notes
3
4
I_{DD_WAIT} Wait mode high frequency current at 3.0 V — all
—
35
TBD
mA
2
peripheral clocks disabled
I_{DD_WAIT} Wait mode reduced frequency current at 3.0 V
—
15
TBD
mA
5
— all peripheral clocks disabled
I_{DD_STOP} Stop mode current at 3.0 V
—
0.4
TBD
mA
I_{DD_VLPR} Very-low-power run mode current at 3.0 V — all
—
1.25
TBD
mA
6
peripheral clocks disabled
I_{DD_VLPR} Very-low-power run mode current at 3.0 V — all
—
TBD
TBD
mA
7
peripheral clocks enabled
I_{DD_VLPW} Very-low-power wait mode current at 3.0 V
—
1.05
TBD
mA
8
I_{DD_VLPS} Very-low-power stop mode current at 3.0 V
—
50
TBD
μA
I_{DD_LLS} Low leakage stop mode current at 3.0 V
—
12
TBD
μA
I_{DD_VLLS3} Very low-leakage stop mode 3 current at 3.0 V
• 128KB RAM devices
—
8
TBD
μA
I_{DD_VLLS2} Very low-leakage stop mode 2 current at 3.0 V
—
4
TBD
μA
I_{DD_VLLS1} Very low-leakage stop mode 1 current at 3.0 V
—
2
TBD
μA
I_{DD_VBAT} Average current when CPU is not accessing
—
550
TBD
nA
9
RTC registers at 3.0 V
1. The analog supply current is the sum of the active or disabled current for each of the analog modules on the device. See
each module's specification for its supply current.
2. 100MHz core and system clock, 50MHz bus and FlexBus clock, and 25MHz flash clock . MCG configured for FEI mode.
All peripheral clocks disabled.
3. 100MHz core and system clock, 50MHz bus and FlexBus clock, and 25MHz flash clock. MCG configured for FEI mode. All
peripheral clocks enabled, but peripherals are not in active operation.
4. 100MHz core and system clock, 50MHz bus and FlexBus clock, and 25MHz flash clock. MCG configured for FEI mode. All
peripheral clocks enabled, and peripherals are in active operation.
5. 25MHz core and system clock, 25MHz bus clock, and 12.5MHz FlexBus and flash clock. MCG configured for FEI mode.
6. 2 MHz core, system, FlexBus, and bus clock and 1MHz flash clock. MCG configured for fast IRCLK mode. All peripheral
clocks disabled. Code executing from flash.
7. 2 MHz core, system, FlexBus, and bus clock and 1MHz flash clock. MCG configured for fast IRCLK mode. All peripheral
clocks enabled but peripherals are not in active operation. Code executing from flash.
8. 2 MHz core, system, FlexBus, and bus clock and 1MHz flash clock. MCG configured for fast IRCLK mode. All peripheral
clocks disabled.
9. Includes 32kHz oscillator current and RTC operation.
K10 Sub-Family Data Sheet Data Sheet, Rev. 4, 3/2011.
14
Preliminary
Freescale Semiconductor, Inc.