908E624 Datasheet, PDF (35/40 Pages) Freescale Semiconductor, Inc – Integrated Triple High-Side Switch with Embedded MCU and LIN Serial Communication for Relay Drivers

PACKAGING
PACKAGING DIMENSIONS
PACKAGING
PACKAGING DIMENSIONS
Important For the most current revision of the package, visit www.freescale.com and do a keyword search on the 98A
drawing number below.
10.3
7.6
7.4
1
PIN 1 INDEX
59
C
B
54
4
18.0
9 ^17.8
B
B
27
28
5.15
2X 27 TIPS
0.3 A B C
2.65
2.35
52X
0.65
CL
A
SEATING
PLANE
54X
0.10 A
NOTES:
1. ALL DIMENSIONS ARE IN MILLIMETERS.
2. DIMENSIONING AND TOLERANCING PER ASME
Y14.5M, 1994.
3. DATUMS B AND C TO BE DETERMINED AT THE PLANE
WHERE THE BOTTOM OF THE LEADS EXIT THE
PLASTIC BODY.
4. THIS DIMENSION DOES NOT INCLUDE MOLD FLASH,
PROTRUSION OR GATE BURRS. MOLD FLASH,
PROTRUSION OR GATE BURRS SHALL NOT EXCEED
0.15 MM PER SIDE. THIS DIMENSION IS DETERMINED
AT THE PLANE WHERE THE BOTTOM OF THE LEADS
EXIT THE PLASTIC BODY.
5. THIS DIMENSION DOES NOT INCLUDE INTERLEAD
FLASH OR PROTRUSIONS. INTERLEAD FLASH AND
PROTRUSIONS SHALL NOT EXCEED 0.25 MM PER
SIDE. THIS DIMENSION IS DETERMINED AT THE
PLANE WHERE THE BOTTOM OF THE LEADS EXIT THE
PLASTIC BODY.
6. THIS DIMENSION DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE DAMBAR PROTRUSION
SHALL NOT CAUSE THE LEAD WIDTH TO EXCEED 0.46
MM. DAMBAR CANNOT BE LOCATED ON THE LOWER
RADIUS OR THE FOOT. MINIMUM SPACE BETWEEN
PROTRUSION AND ADJACENT LEAD SHALL NOT LESS
THAN 0.07 MM.
7. EXACT SHAPE OF EACH CORNER IS OPTIONAL.
8. THESE DIMENSIONS APPLY TO THE FLAT SECTION
OF THE LEAD BETWEEN 0.1 MM AND 0.3 MM FROM
THE LEAD TIP.
9. THE PACKAGE TOP MAY BE SMALLER THAN THE
PACKAGE BOTTOM. THIS DIMENSION IS
DETERMINED AT THE OUTERMOST EXTREMES OF
THE PLASTIC BODY EXCLUSIVE OF MOLD FLASH, TIE
BAR BURRS, GATE BURRS AND INTER-LEAD FLASH,
BUT INCLUDING ANY MISMATCH BETWEEN THE TOP
AND BOTTOM OF THE PLASTIC BODY.
(0.29)
BASE METAL
A
R0.08 MIN
0° MIN
0.30
0.25
(0.25)
0.38
0.25
GAUGE PLANE
0.29
0.13
6 0.22
PLATING
A
0.13 M A B C ₈
SECTION A-A
8°
0°
0.9
0.5
SECTION B-B
ROTATED 90_° CLOCKWISE
DWB SUFFIX
E_CW_AS_SU_EFF₁IX₃(₆P₅b_--₀F₁REE)
54-TERMI_IN_SA_SL_US_EOIC_OWIDE BODY
PLASTIC PACKAGE
98ASA99294D
ISSUE O
DATE 09/19/01
Analog Integrated Circuit Device Data
Freescale Semiconductor
908E624
35