MC9S08JE128 Datasheet, PDF (19/44 Pages) Freescale Semiconductor, Inc – Covers: MC9S08JE128 and MC9S08JE64

Preliminary Electrical Characteristics
7 _{Power supply must maintain regulation within operating VDD range during instantaneous and operating}
maximum current conditions. If positive injection current (V_In > V_DD) is greater than I_DD, the injection current
may flow out of V_DD and could result in external power supply going out of regulation. Ensure external V_DD
load will shunt current greater than maximum injection current. This will be the greatest risk when the MCU
is not consuming power. Examples are: if no system clock is present, or if clock rate is very low (which would
reduce overall power consumption).
8 _{Maximum is highest voltage that POR is guaranteed.}
9 _{Run at 1 MHz bus frequency}
10 _{Low voltage detection and warning limits measured at 1 MHz bus frequency.}
11 _{Factory trimmed at VDD = 3.0 V, Temp = 25°C}
Freescale Semiconductor
19
Non-Disclosure Agreement Required
Preliminary — Subject to Change