MC9S08MP16 Datasheet, PDF (17/36 Pages) Freescale Semiconductor, Inc – 8-Bit HCS08 Central Processor Unit (CPU)

Electrical Characteristics
Table 8. Supply Current Characteristics (continued)
Num C
Parameter
Symbol
V_DD
(V)
Typ¹
Max²
Unit
C LVD adder to stop3 (LVDE = LVDSE = 1)
10
S3I_DDLVD
5
110
180
μA
3
90
160
μA
11
C Adder to stop3 for oscillator enabled⁸
(EREFSTEN =1)
S3I_DDOSC
5,3
5
8
μA
1 _{Typical values are based on characterization data at 25°C. See Figure 9 through Figure 14 for typical curves across}
temperature and voltage.
2 _{Max values in this column apply for the full operating temperature range of the device unless otherwise noted.}
3 _{All modules except ADC active, ICS configured for FBELP, and does not include any dc loads on port pins}
4 _{All modules except ADC active, ICS configured for FEI, and does not include any dc loads on port pins}
5 _{All modules except ADC active, ICS configured for FEI, and does not include any dc loads on port pins}
6 _{Stop currents are tested in production for 25°C on all parts. Tests at other temperatures depend upon the part}
number suffix and maturity of the product. Freescale may eliminate a test insertion at a particular temperature from
the production test flow once sufficient data has been collected and is approved.
7 _{Most customers are expected to find that auto-wakeup from stop2 or stop3 can be used instead of the higher}
current wait mode.
8 _{Values given under the following conditions: low range operation (RANGE = 0) with a 32.768kHz crystal and low}
power mode (HGO = 0).
16
FBE
FEI
14
12
10
8
6
4
2
0
2
8
16
20
25
fbus (MHz)
Figure 9. Typical Run I_DD vs. Bus Frequency (V_DD = 5V)
MC9S08MP16 Series Data Sheet, Rev. 1
Freescale Semiconductor
17