MRF7P20040HR3_10 Datasheet, PDF (15/16 Pages) Freescale Semiconductor, Inc – RF Power Field Effect Transistors N--Channel Enhancement--Mode Lateral MOSFETs

PRODUCT DOCUMENTATION, TOOLS AND SOFTWARE
Refer to the following documents, tools and software to aid your design process.
Application Notes
• AN1955: Thermal Measurement Methodology of RF Power Amplifiers
Engineering Bulletins
• EB212: Using Data Sheet Impedances for RF LDMOS Devices
Software
• Electromigration MTTF Calculator
• RF High Power Model
• .s2p File
For Software and Tools, do a Part Number search at http://www.freescale.com, and select the “Part Number” link. Go to the
Software & Tools tab on the part’s Product Summary page to download the respective tool.
R5 TAPE AND REEL OPTION
R5 Suffix = 50 Units, 56 mm Tape Width, 13 inch Reel.
The R5 tape and reel option for MRF7P20040H and MRF7P20040HS parts will be available for 2 years after release of
MRF7P20040H and MRF7P20040HS. Freescale Semiconductor, Inc. reserves the right to limit the quantities that will be
delivered in the R5 tape and reel option. At the end of the 2 year period customers who have purchased these devices in the R5
tape and reel option will be offered MRF7P20040H and MRF7P20040HS in the R3 tape and reel option.
REVISION HISTORY
The following table summarizes revisions to this document.
Revision
0
1
2
Date
June 2009
Aug. 2009
Dec. 2010
Description
• Initial Release of Data Sheet
• Removed IQ Magnitude Clipping from Typical Performance bullet, p. 1 and Functional Test header, p. 2
• Electrical Characteristics, DC tests: updated footnote to indicate each side of device measured
separately, p. 2
• Updated frequency in overview paragraph from “2010 to 2025 MHz” to “1800 to 2200 MHz” per expanded
load pull characterization shown in Fig. 14, Carrier Side Load Pull Performance — Maximum P3dB
Tuning and Fig. 15, Carrier Side Load Pull Performance — Maximum Efficiency Tuning, p. 1
• Added CW Operation information to Maximum Ratings table, p. 1
• In Table 2, Thermal Characteristics, P_out = 10 W CW thermal resistance values changed from
I_DQA 2.5/V_GSB 2.9 to 2.11_C/W and P_out = 40 W CW thermal resistance value changed from 2.3 to
1.50_C/W. Thermal values now reflect the use of the combined dissipated power from the carrier
amplifier and peaking amplifier, p. 1
• Added Fig. 14, Carrier Side Load Pull Performance — Maximum P3dB Tuning and Fig. 15, Carrier Side
Load Pull Performance — Maximum Efficiency Tuning to show load pull data for expanded frequency range
presented in p. 1 overview paragraph, p. 10
RF Device Data
Freescale Semiconductor
MRF7P20040HR3 MRF7P20040HSR3
15