MC9S12XF512 Datasheet, PDF (1282/1300 Pages) Freescale Semiconductor, Inc – S12X Microcontrollers

Appendix F Ordering Information
Appendix F
Ordering Information
The following figure provides an ordering partnumber example for the devices covered by this data book.
There are two options when ordering a device. Customers must choose between ordering either the mask-
specific partnumber or the generic / mask-independent partnumber Ordering the mask-specific
partnumber enables the customer to specify which particular maskset they will receive whereas ordering
the generic maskset means that FSL will ship the currently preferred maskset (which may change over
time).
In either case, the marking on the device will always show the generic / mask-independent partnumber and
the mask set number.
NOTE
The mask identifier suffix and the Tape & Reel suffix are always both omitted from the
partnumber which is actually marked on the device.
For specific partnumbers to order, please contact your local sales office. The below figure illustrates the
structure of a typical mask-specific ordering number for the MC9S12XF-Family devices
S 9 S12X F512 J0 C AG R
Tape & Reel
Package Option
R = Tape & Reel
No R = No Tape & Reel
LH = 64 LQFP
LM = 112 LQFP
C = -40˚C to 85˚C
Temperature Option ^{V = -40˚C to 105˚C}
M = -40˚C to 125˚C
Maskset identifier Suffix
First digit usually references wafer fab
Second digit usually differentiates mask rev
(This suffix is omitted in generic partnumbers)
Device Title
Controller Family
Main Memory Type:
9 = Flash
3 = ROM (if available)
Statuts / Partnumber type:
S or SC = Maskset specific partnumber
MC = Generic / mask-independebt partnumber
P or PC = prototype status (pre qualification
Figure F-1. Order Part Number Example
1284
MC9S12XF - Family Reference Manual, Rev.1.18
Freescale Semiconductor