K10P64M50SF0 Datasheet, PDF (11/61 Pages) Freescale Semiconductor, Inc – K10 Sub-Family

5.2.1 Voltage and current operating requirements
Table 1. Voltage and current operating requirements
Symbol Description
V_DD
Supply voltage
V_DDA
Analog supply voltage
V_DD – V_DDA V_DD-to-V_DDA differential voltage
V_SS – V_SSA V_SS-to-V_SSA differential voltage
V_BAT
RTC battery supply voltage
V_IH
Input high voltage
• 2.7 V ≤ V_DD ≤ 3.6 V
• 1.7 V ≤ V_DD ≤ 2.7 V
Min.
Max.
Unit
1.71
3.6
V
1.71
3.6
V
–0.1
0.1
V
–0.1
0.1
V
1.71
3.6
V
0.7 × V_DD
—
V
0.75 × V_DD
—
V
General
Notes
V_IL
Input low voltage
• 2.7 V ≤ V_DD ≤ 3.6 V
• 1.7 V ≤ V_DD ≤ 2.7 V
—
0.35 × V_DD
V
—
0.3 × V_DD
V
V_HYS
Input hysteresis
0.06 × V_DD
—
V
I_ICIO
I/O pin DC injection current — single pin
• V_IN < V_SS-0.3V (Negative current injection)
• V_IN > V_DD+0.3V (Positive current injection)
1
mA
-3
—
—
+3
I_ICcont
Contiguous pin DC injection current —regional limit,
includes sum of negative injection currents or sum of
positive injection currents of 16 contiguous pins
• Negative current injection
-25
—
mA
• Positive current injection
—
+25
V_RAM
V_DD voltage required to retain RAM
1.2
—
V
V_RFVBAT V_BAT voltage required to retain the VBAT register file V_{POR_VBAT}
—
V
1. All analog pins are internally clamped to V_SS and V_DD through ESD protection diodes. If V_IN is greater than V_{AIO_MIN}
(=V_SS-0.3V) and V_IN is less than V_{AIO_MAX}(=V_DD+0.3V) is observed, then there is no need to provide current limiting
resistors at the pads. If these limits cannot be observed then a current limiting resistor is required. The negative DC
injection current limiting resistor is calculated as R=(V_{AIO_MIN}-V_IN)/|I_IC|. The positive injection current limiting resistor is
calcualted as R=(V_IN-V_{AIO_MAX})/|I_IC|. Select the larger of these two calculated resistances.
5.2.2 LVD and POR operating requirements
Table 2. V_DD supply LVD and POR operating requirements
Symbol Description
Min.
Typ.
Max.
Unit
V_POR Falling VDD POR detect voltage
0.8
1.1
1.5
V
Table continues on the next page...
Notes
K10 Sub-Family Data Sheet, Rev. 4 5/2012.
Freescale Semiconductor, Inc.
11