MC9S08LG32_09 Datasheet, PDF (10/50 Pages) Freescale Semiconductor, Inc – 8-bit HCS08 Central Processor Unit (CPU)

Electrical Characteristics
Table 2. Pin Availability by Package Pin-Count (continued)
Packages
<-- Lowest Priority --> Highest
80
64
48
Port Pin
77
61
45
78
62
46
79
63
47
80
64
48
PTE3
PTE2
PTE1
PTE0
Alt 1
LCD11
LCD10
LCD9
LCD8
Alt 2
—
—
—
—
Alt 3
—
—
—
—
Alt 4
—
—
—
—
2 Electrical Characteristics
2.1 Introduction
This section contains electrical and timing specifications for the MC9S08LG32 series of microcontrollers available at the time
of publication.
2.2 Parameter Classification
The electrical parameters shown in this supplement are guaranteed by various methods. To give the customer a better
understanding the following classification is used and the parameters are tagged accordingly in the tables where appropriate:
Table 3. Parameter Classifications
P ^{Those parameters are guaranteed during production testing on each individual device.}
C
Those parameters are achieved by the design characterization by measuring a statistically relevant
sample size across process variations.
Those parameters are achieved by design characterization on a small sample size from typical devices
T under typical conditions unless otherwise noted. All values shown in the typical column are within this
category.
D ^{Those parameters are derived mainly from simulations.}
NOTE
The classification is shown in the column labeled “C” in the parameter tables where
appropriate.
2.3 Absolute Maximum Ratings
Absolute maximum ratings are stress ratings only, and functional operation at the maxima is not guaranteed. Stress beyond the
limits specified in Table 4 may affect device reliability or cause permanent damage to the device. For functional operating
conditions, refer to the remaining tables in this section.
This device contains circuitry that protects against damage due to high static voltage or electrical fields. However, it is advised
that normal precautions should be taken to avoid application of any voltages higher than maximum-rated voltages to this
high-impedance circuit. Reliability of operation is enhanced if unused inputs are tied to an appropriate logic voltage level (for
instance, either V_SS or V_DD) or the programmable pull-up resistor associated with the pin is enabled.
MC9S08LG32 Series Data Sheet, Rev. 7
10
Freescale Semiconductor