MC9S08GW64_11 Datasheet, PDF (10/42 Pages) Freescale Semiconductor, Inc – HC08 instruction set with added BGND instruction

Electrical Characteristics
Table 2. Pin Availability by Package Pin-Count (continued)
80
64
Port Pin Default func
Alt 1
Alt 2
Alt3
Alt4
77
61
V_LL2
V_LL2
78
62
V_LL1
V_LL1
79
63
V_CAP2
V_CAP2
80
64
V_CAP1
V_CAP1
1 _{TAMPER0 pin is dedicatedly used for Battery Removal Tamper and not exposed on any SoC pins.}
2 _{PTA5 is with double drive strength.}
3 _{PTA6 is an output-only pin when it is configured as GPIO.}
4 _{PTB2, PTB3 and PTB4 are compatible with 5 V devices with a pullup device.}
3 Electrical Characteristics
3.1 Introduction
This section contains electrical and timing specifications for the MC9S08GW64 sries of microcontrollers available at the time
of publication.
3.2 Parameter Classification
The electrical parameters shown in this supplement are guaranteed by various methods. To give the customer a better
understanding the following classification is used and the parameters are tagged accordingly in the tables where appropriate:
Table 3. Parameter Classifications
P Those parameters are guaranteed during production testing on each individual device.
C
Those parameters are achieved by the design characterization by measuring a statistically relevant
sample size across process variations.
Those parameters are achieved by design characterization on a small sample size from typical devices
T under typical conditions unless otherwise noted. All values shown in the typical column are within this
category.
D Those parameters are derived mainly from simulations.
NOTE
The classification is shown in the column labeled “C” in the parameter tables where
appropriate.
3.3 Absolute Maximum Ratings
Absolute maximum ratings are stress ratings only, and functional operation at the maxima is not guaranteed. Stress beyond the
limits specified in Table 4 may affect device reliability or cause permanent damage to the device. For functional operating
conditions, refer to the remaining tables in this section.
This device contains circuitry protecting against damage due to high static voltage or electrical fields; however, it is advised
that normal precautions be taken to avoid application of any voltages higher than maximum-rated voltages to this
MC9S08GW64 Series MCU Data Sheet, Rev. 3
10
Freescale Semiconductor