74ABT374_07 Datasheet, PDF (3/13 Pages) Fairchild Semiconductor – Octal D-Type Flip-Flop with 3-STATE Outputs

Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Symbol
T_STG
T_A
T_J
V_CC
V_IN
I_IN
V_O
Parameter
Storage Temperature
Ambient Temperature Under Bias
Junction Temperature Under Bias
V_CC Pin Potential to Ground Pin
Input Voltage⁽²⁾
Input Current⁽²⁾
Voltage Applied to Any Output
Disabled or Power-Off State
HIGH State
Current Applied to Output in LOW State (Max.)
DC Latchup Source Current Across Common Operating Range
OE Pin
Other Pins
Over Voltage Latchup (I/O)
Rating
–65°C to +150°C
–55°C to +125°C
–55°C to +150°C
–0.5V to +7.0V
–0.5V to +7.0V
–30mA to +5.0mA
–0.5V to 5.5V
–0.5V to V_CC
twice the rated I_OL (mA)
–150mA
–500mA
10V
Note:
2. Either voltage limit or current limit is sufficient to protect inputs.
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to absolute maximum ratings.
Symbol
T_A
V_CC
∆V / ∆t
Parameter
Free Air Ambient Temperature
Supply Voltage
Minimum Input Edge Rate
Data Input
Enable Input
Clock Input
Rating
–40°C to +85°C
+4.5V to +5.5V
50mV/ns
20mV/ns
100mV/ns
©1992 Fairchild Semiconductor Corporation
74ABT374 Rev. 1.4
3
www.fairchildsemi.com