9020 Datasheet, PDF (24/25 Pages) Fairchild Semiconductor – IGBT Basic II

*Reference
[1]. Malay Trivedi and Krishna Shenai, “Failure Mechanism of IGBT’s Under Short-Circuit and
Clamped Inductive Switching Stress,” IEEE Trans. Power Electronics, vol. 14, no. 1,
pp. 108-116, 1999.
[2]. Rahul S. Chokhawala and Saed Sobhani, “Switching Voltage Transient Protection
Schemes for High-Current IGBT Modules,” IEEE Trans. Industry Applications, vol. 33,
no. 6, pp. 1601-1610, 1997.
[3]. Rahul S. Chokhawala, Jamie Catt and Laszlo Kiraly, “A Discussion on IGBT Short-Circuit
Behavior and Fault Protection Schemes,” IEEE Trans. Industry Applications, vol. 31, no. 2,
pp. 256-263, 1995.
[4]. Malay Trivedi and Krishna Shenai, “Internal Dynamics of IGBT During Short Circuit
Switching,” IEEE BCTM, pp. 77-80, 1996.
[5]. J. Yamashita, A. Uenishi, Y. Tomomatsu H. Haruguchi, H. Dakahashi, I. Takata and
H. Hagino, “A Study on the Short Circuit Destruction of IGBTs,” ISPSD, pp. 35-39, 1993.
[6]. Rahul Chokhawala and Giuseppe Castino, “IGBT Fault Current Limiting Circuit,” IEEE IAS,
pp.1339-1345, 1993.
[7]. Tadashi Miyasaka and Shyuji Miyashita, “Protection of IGBT Modules in Inverter Circuits,”
Power Conversion, pp. 211-216, 1991.
[8]. Hiroyasu Hagino, Jun’ichi Yamashita, Akio Uenishi and Hideki Haruguchi, “An Experimen-
tal and Numerical Study on the Forward Biased SOA of IGBT’s,” IEEE Trans. Electron
Devices, vol. 43, no. 3, pp. 490-499, 1996.
[9]. Malay Trivedi and Krishina Shenai, “Trade-Off in IGBT Safe Operating Area and Perfor-
mance Parameters,” IAS Conf., pp. 949-954, 1997.
[10]. Yi Zhang, Saed Sobhani and Rahul Chokhawala, “Snubber Considerations for IGBT
Applications,” IPEMC, pp. 261-269, 1994.
[11]. Malay Trivedi and Krishina Shenai, “Investigation of the Short-Circuit Performance of an
IGBT,” IEEE Trans. Electron Devices, vol. 45, no. 1, pp. 313-320, 1998.
[12]. Malay Trivedi and Krishina Shenai, “IGBT Dynamics For Short-Circuit And Clamped
Inductive Switching,” IEEE APEC, vol. 2, pp. 743-748, 1998.
[13]. Rahul S. Chokhawala, Jamie Catt, and Brian R. Pelly, “Gate Drive considerations for
IGBT Modules,” IEEE Trans. Industry Applications, vol. 31, issue 3, pp.603-611, 1995.
[14]. Rahul S. Chokhawala, Jamie Catt, and Laszlo Kiraly, “A Discussion on IGBT Short-circuit
Behavior and Fault Protection Schemes,” IEEE Trans. Industry Applications, vol. 31,
issue 2, pp.256-263, 1995.
[15]. Malay Trivedi and Krishina Shenai, “IGBT Dynamics for Clamped Inductive Switching,”
IEEE Trans. Electron Devices, vol. 45, no. 12, pp.2537-2545, 1998.
[16]. C. Aniceto, R.Letor, “How Short Circuit Capabilities Govern the Desired Characteristics of
IGBTs” Power Conversion – PCIM, 1992,
[17]. R. Locher, “Short Circuit Proof IGBTs Simplify Overcurrent Protection,” IAS,1991
24
Rev. A, April 2002