FMS6403_05 Datasheet, PDF (2/17 Pages) Fairchild Semiconductor – Triple Video Drivers with Selectable HD/PS/SD/ Bypass Filters for RGB and YPbPr Signals

DATA SHEET
FMS6403
DC Electrical Specifications
(T_C = 25°C, V_i = 1V_pp, V_CC = 5.0V, all inputs AC coupled with 0.1µF, all outputs AC coupled with 220µF into 150Ω,
referenced to 400kHz; unless otherwise noted)
Symbol
I_CC
V_i
V_il
Parameter
Supply Current¹
Input Voltage Max
Digital Input Low¹
V_ih
Digital Input High¹
V_CLAMP1
V_CLAMP2
PSRR
Output Clamp Voltage
Output Clamp Voltage
Power Supply Rejection Ratio
Conditions
Min Typ Max Units
V_CC no load
F_SEL0, F_SEL1, RGB_SEL, 0dB_SEL, 0
EXT_SYNC, IN2_SEL, SYNC_IN
90 130 mA
1.5
V_pp
0.8 V
F_SEL0, F_SEL1, RGB_SEL, 0dB_SEL, 2.4
EXT_SYNC, IN2_SEL, SYNC_IN
V_CC
V
R,G,B,Y
250
mV
Pb and Pr
1.125
V
DC (All Channels)
-40
dB
Standard Definition Electrical Specifications
(T_C = 25°C, V_i = 1V_pp, V_CC = 5.0V, F_SEL0 = 0, F_SEL1 = 0, 0dB_SEL = 0 (gain = 6dB), R_source = 37.5Ω, all inputs AC
coupled with 0.1µF, all outputs AC coupled with 220µF into 150Ω, referenced to 400kHz; unless otherwise noted)
Symbol
AV_SD
AV_SD
f_1dBSD
f_CSD
f_SBSD
dG
Parameter
SD Gain, 0dB_SEL = ‘0’¹
SD Gain, 0dB_SEL = ‘1’¹
-1dB Bandwidth for SD¹
-3dB Bandwidth for SD
Attenuation: SD (Stopband Reject)¹
Differential Gain
Conditions
All Channels SD Mode
All Channels SD Mode
All Channels
All Channels
All Channels at f = 27MHz
All Channels
Min Typ Max Units
5.6 6.0 6.4 dB
-0.4 0 0.4 dB
5.5 7.6
MHz
8.5
MHz
40 56
dB
0.40
%
dφ
Differential Phase
All Channels
0.25
°
THD
Output Distortion (All Channels)
V_out = 1.8V_pp at 1MHz
0.4
%
X_TALK
Crosstalk (Channel-to-Channel)
at 1.0MHz
-68
dB
IN_MUXISO IN_MUX Isolation
at 1.0MHz
-70
dB
SNR
Signal-to-Noise Ratio
All Channels, NTC-7 Weighting,
74
dB
4.2MHz lowpass, 100kHz Highpass
t_pdSD
Propagation Delay for SD
T1
SYNC to SYNC_IN Delay
Delay from Input to Output at 4.5MHz
80
ns
10
ns
T2
SYNC_IN Min Pulse Width
4
µs
Progressive Scan (PS) Electrical Specifications
(T_C = 25°C, V_i = 1V_pp, V_CC = 5.0V, F_SEL0 = 1, F_SEL1 = 0, 0dB_SEL = 0 (gain = 6dB), R_source = 37.5Ω, all inputs AC
coupled with 0.1µF, all outputs AC coupled with 220µF into 150Ω, referenced to 400kHz; unless otherwise noted)
Symbol Parameter
AV_PS
AV_PS
f_1dBPS
PS Gain, 0dB_SEL = ‘0’¹
PS Gain, 0dB_SEL = ‘1’¹
-1dB Bandwidth for PS¹
Note:
1. 100% tested at 25°C.
Conditions
All Channels PS Mode
All Channels PS Mode
All Channels
Min Typ Max Units
5.6 6.0 6.4 dB
-0.4 0 0.4 dB
10 15
MHz
2
REV. 1C March 2005