English
Language : 

FXMHD103UMX Datasheet, PDF (1/16 Pages) Fairchild Semiconductor – FXMHD103 HDMI Voltage Translator
July 2012
FXMHD103 — HDMI Voltage Translator
Features
 CEC, DDC, and HPD Level Shifting without a
Direction Pin
 Host Port Voltage Supply (VCCA): 1.6V – 3.6V
 HDMI Port Voltage Supply (VCCC): 4.8V – 5.3V
 Long HDMI Cable Support with Integrated DDC
(I2C) Edge Rate Accelerators
 Supports DDC (I2C) Clock Stretching
 Pin Out Tailored for PCB Trace Routing to HDMI
Type D Connectors
 Back Drive Protection
 Non-Preferential Power-Up/Down Sequencing
between VCCA and VCCC
 Operating Temperature Range: -40°C to 85°C
 ESD Protection:
- 8kV HBM (per JESD22-A114)
- 2kV CDM (per JESD22-C101)
Applications
 Smart Phones
 Multimedia Phones
 Digital Camcorders
 Digital Still Cameras
 Portable Game Consoles
 Notebooks
 MP3 Players
 PC and Consumer Electronics
Description
The FXMHD103 is a reduced-pin-count, low-power,
High-Definition Multimedia Interface (HDMI), voltage
translator for the Data Display Channel (DDC),
Consumer Electronic Control (CEC), and Hot Plug
Detect (HPD) control lines.
There are three non-inverting bi-directional voltage
translation circuits for the DDC serial data (SDA)/clock
(SCL) lines and CEC lines. Each line has a common
power rail (VCCA) on the host side from 1.6V to 3.6V. On
the HDMI connector side, the SCL_C and SDA_C pins
each have an internal 1.75KΩ pull-up connected to the
HDMI 5V rail, VCCC. The SCL and SDA pins exceed the
HDMI specification for driving up to 800pF loads. The
CEC_C pin has an internal 27KΩ pull-up to an internal
3.3V supply (VREG).
The HPD_C path is uni-directional. The direction is from
the HDMI connector port to the host port. HPD_H
references VCCA, and HPD_C references VCCC. HPD_C
offers hysteresis to avoid false detection due to
bouncing while inserting the HDMI plug.
The FXMHD103 device can be powered down if the OE
pin is LOW. If OE is HIGH, the HPD path is enabled. If
an HDMI sink asserts the HPD_C pin HIGH, the DDC
and CEC paths are enabled. OE references VCCA.
Back drive protection is provided on pins facing the
HDMI connector.
Ordering Information
Part Number Top Mark
FXMHD103UMX
BZ
Operating
Temperature Range
-40°C to 85°C
Package
12-Terminal, Quad µMLP,
1.8mm x 1.8mm Package
Packing
Method
5000 Units on
Tape and Reel
© 2012 Fairchild Semiconductor Corporation
FXMHD103 • Rev. 1.0.2
www.fairchildsemi.com