FOD8001R2 Datasheet, PDF (1/12 Pages) Fairchild Semiconductor – High Noise Immunity, 3.3V/5V Logic Gate Optocoupler

December 2010
FOD8001
High Noise Immunity, 3.3V/5V Logic Gate Optocoupler
Features
■ High Noise Immunity characterized by Common Mode
Rejection (CMR) and Power Supply Rejection (PSR)
specifications
– 20kV/µs Minimum Static CMR @ Vcm = 1000V
– 25kV/µs Typical Dynamic CMR @ Vcm = 1500V,
20MBaud Rate
– PSR in excess of 10% of the supply voltages
across full operating bandwidth
■ High Speed:
– 25Mbit/sec Date Rate (NRZ)
– 40ns max. Propagation Delay
– 6ns max. Pulse Width Distortion
– 20ns max. Propagation Delay Skew
■ 3.3V and 5V CMOS Compatibility
■ Extended industrial temperate range, -40°C to 105°C
temperature range
■ Safety and regulatory pending approvals:
– UL1577, 3750 VACRMS for 1 min.
– IEC60747-5-2 (pending)
Applications
■ Industrial fieldbus communications
– Profibus, DeviceNet, CAN, RS485
■ Programmable Logic Control
■ Isolated Data Acquisition System
Description
The FOD8001 is a 3.3V/5V high-speed logic gate
Optocoupler, which supports isolated communications
allowing digital signals to communicate between sys-
tems without conducting ground loops or hazardous
voltages. It utilizes Fairchild’s proprietary coplanar pack-
aging technology, Optoplanar^®, and optimized IC design
to achieve high noise immunity, characterized by high
common mode rejection and power supply rejection
specifications.
This high-speed logic gate optocoupler, packaged in a
compact 8-pin small outline package, consists of a high-
speed AlGaAs LED driven by a CMOS buffer IC coupled
to a CMOS detector IC. The detector IC comprises an
integrated photodiode, a high-speed transimpedance
amplifier and a voltage comparator with an output driver.
The CMOS technology coupled to the high efficiency of
the LED achieves low power consumption as well as
very high speed (40ns propagation delay, 6ns pulse
width distortion).
Related Resources
■ www.fairchildsemi.com/products/opto/
■ www.fairchildsemi.com/pf/FO/FOD0721.html
■ www.fairchildsemi.com/pf/FO/FOD0720.html
■ www.fairchildsemi.com/pf/FO/FOD0710.html
Functional Schematic
V_{DD1 1}
8 ^VDD2
V_I 2
7 NC
*³
6 VO
GND1 4
5 GND2
*: Pin 3 must be left unconnected
©2008 Fairchild Semiconductor Corporation
FOD8001 Rev. 1.0.3
Truth Table
V_I LED V_O
H OFF H
L ON L
www.fairchildsemi.com