FAN2564_11 Datasheet, PDF (1/13 Pages) Fairchild Semiconductor – 300mA Low VIN LDO for Digital Applications

April 2011
FAN2564
300mA Low V_IN LDO for Digital Applications
Features
 Input Voltage 1.65V to 3.6V
 Guaranteed 300mA Output
 High Initial Output Voltage Accuracy: ±1%
 Fixed Output Voltage options from 1.2V to 2.8V
 Very Low Dropout: 100mV at 300mA
 45µA Quiescent Current at No Load
 Low Output Noise of 100µV_RMS
 Inrush Current Controlled to Less Than 500mA
 PSRR of 60dB at 1kHz
 100µs Startup Time
 Stable with Ceramic Capacitors
 Thermal and Short-Circuit Protection
 4-bump WLCSP, 0.5mm Pitch
 6-pin 2 x 2mm UMLP
Applications
 Post Regulator
 Cell Phones and Smart Phones
 WLAN, 3G, and 4G Data Cards
 PMP and MP3 Players
Description
The FAN2564 operates from a minimum input of 1.65V
and provides outputs as low as 1.2V. Output current is
guaranteed to 300mA, making this regulator ideal for
digital loads.
The unique low input voltage capability and very low
dropout make this device an ideal post regulator to a
synchronous buck regulator. In this configuration, accu-
rate low voltage regulation is provided without the ineffi-
ciencies typically related to linear regulators.
The enable pin can be used to initiate shutdown mode,
where the operating current falls to an extremely low
10nA, typically.
The FAN2564 is designed to be stable with space-
saving ceramic capacitors as small as 0402 case size.
The FAN2564 is available in 4-bump 0.5mm pitch wafer-
level chip-scale package (WLCSP) and a 6-lead 2 x
2mm ultra-thin molded leadless package (UMLP).
Typical Application Circuit
© 2007 Fairchild Semiconductor Corporation
FAN2564 • Rev. 1.0.2
Figure 1. Typical Application Circuit
www.fairchildsemi.com