FO600 Datasheet, PDF (35/57 Pages) Extech Instruments Corporation. – FiberMeter Optical Power Meter

UNIT 3
CERTIFICATION METER
CERTIFICATION METER - Cabling Standard Certification Test; cont.
26) A review screen will appear with three options:
ACME CORP.
NAME FBR:1
TYPE 62 5um MM
F1 ABORT - do NOT save the data point, and return to Immediate
dB PASS
Mode to re-test the same data point. If a FAIL reading appears, it _{-2X45 1850nm}
is recommended to ABORT, clean all connections, and then re- ^{_____________________}
test.
ABORT RENAME SAVE
Data Point Review
F2 ^{RENAME - change the descriptive fiber name (same as step 27).}
F3 _{SAVE - save the data point, and advance to the next data point in Immediate Mode. Notice}
that the fiber number automatically increments to the next number.
27) Once the data has been stored for the current fiber, move the units to the next fiber, and repeat steps
24 through 26 until all fibers have been tested.
Once all data is stored in the FiberMeter, they can be downloaded to a PC which has Extech Reporter
installed. Please consult the Extech Reporter unit for more information.
NOTE: the memory in the FiberMeter allows for permanent storage of data, including reference and power
readings. Data will remain in the meter, even when the unit is powered off, until it is removed by the user.
3-14