FO600 Datasheet, PDF (15/57 Pages) Extech Instruments Corporation. – FiberMeter Optical Power Meter

UNIT 1
FEATURES & FUNCTIONS
LIGHT SOURCE MENU (FO602 versions only)
In the FiberMeter model FO602, the SOURCE SETTINGS menu allows the user
to control the options of the light source. The options on this menu will change
based upon the configuration of the installed light source.
1)
Press .
SOURCE SETTINGS
WAVE
LENGTH TONE AUTO
------ ---- ----
OFF
NONE OFF
_____________________
WAVE TONE
2) F1 WAVELENGTH - turns the light source OFF or ON. If multiple
wavelengths are present, this button will cycle through all of the available
wavelengths.
F2 TONE - toggles the TONE option for the currently selected wavelength,
and shows the toning frequency.
F3 ^{AUTO - this option sets the light source into AUTO mode when multiple}
wavelengths are present; it is deactivated for single-wavelength
configurations.
3)
Press DONE when finished.
An indicator will appear in Immediate Mode (shown in red box at right).
F1 F2 F3
SOURCE SETTINGS
MENU
dBm
Hz
-20 45 82
68%
FIBER LINK #1
850
FBR:123
850nm
_____________________
UNITS STORE WAVE
IMMEDIATE MODE
Light Source Indicator
The lightbulb icon indicates whether the light source is in continuous wave (CW) mode (icon stays on), or in
toning mode (icon flashes). The number next to the icon shows the currently selected light source
wavelength.
1-9