English
Language : 

XR16V698 Datasheet, PDF (56/58 Pages) Exar Corporation – 2.25V TO 3.6V HIGH PERFORMANCE OCTAL UART WITH 32-BYTE FIFO
XR16V698
2.25V TO 3.6V HIGH PERFORMANCE OCTAL UART WITH 32-BYTE FIFO
REVISION HISTORY
REV. 1.0.3
REVISION
DATE
DESCRIPTION
P1.0.0
July 2007 Preliminary Datasheet.
1.0.0 November 2007 Final Datasheet. Updated DC and AC Electrical Specs.
1.0.1 December 2007 Datasheet correction. Removed reference to TXCNT and RXCNT registers since the
XR16V698 does not have this feature.
1.0.2 January 2008 Corrected Ordering Part Number.
1.0.3
July 2008 Corrected description of Xon/Xoff/Special character interrupt.
NOTICE
EXAR Corporation reserves the right to make changes to the products contained in this publication in order to
improve design, performance or reliability. EXAR Corporation assumes no responsibility for the use of any
circuits described herein, conveys no license under any patent or other right, and makes no representation that
the circuits are free of patent infringement. Charts and schedules contained here in are only for illustration
purposes and may vary depending upon a user’s specific application. While the information in this publication
has been carefully checked; no responsibility, however, is assumed for inaccuracies.
EXAR Corporation does not recommend the use of any of its products in life support applications where the
failure or malfunction of the product can reasonably be expected to cause failure of the life support system or
to significantly affect its safety or effectiveness. Products are not authorized for use in such applications unless
EXAR Corporation receives, in writing, assurances to its satisfaction that: (a) the risk of injury or damage has
been minimized; (b) the user assumes all such risks; (c) potential liability of EXAR Corporation is adequately
protected under the circumstances.
Copyright 2008 EXAR Corporation
Datasheet July 2008.
Send your UART technical inquiry with technical details to hotline: uarttechsupport@exar.com.
Reproduction, in part or whole, without the prior written consent of EXAR Corporation is prohibited.
56