|
XRD9814B Datasheet, PDF (1/53 Pages) Exar Corporation – 3-Channel 14/16-Bit Linear CCD/CIS Sensor Signal Processors | |||
|
XRD9814B/XRD9816B
3-Channel 14/16-Bit Linear
CCD/CIS Sensor Signal Processors
FEATURES
⢠14-Bit (XRD9814B) or 16-Bit (XRD9816B)
A/D Converter
⢠Triple-Channel, 2.5 MSPS Color Scan Mode
⢠Single-Channel, 6 MSPS Monochrome Scan
Mode
⢠Triple Correlated Double Sampler
⢠Triple 10-Bit Programmable Gain Amplifier
⢠Triple 10-Bit Offset Compensation DAC
⢠Fully Differential or Single-Ended Inputs
⢠CDS or S/H Mode
⢠Inverting or Non-Inverting Mode
⢠Internal Voltage Reference
⢠Serial Control: On Data Bus or Separate Pins
⢠Improved PGA Performance
November 2002-2
⢠14-Bit or 8-Bit (Nibble) Parallel Data Output
(XRD9814B)
⢠16-Bit or 8-Bit (Nibble) Parallel Data Output
(XRD9816B)
⢠5V Operation and 3V I/O Compatibility
⢠Low Power CMOS: 500mW @ 5V
APPLICATIONS
⢠48-Bit Color Scanners (XRD9816B)
⢠42-Bit Color Scanners (XRD9814B)
⢠CCD or CIS Color Imagers
⢠Gray Scale Scanners
⢠Film Scanners
GENERAL DESCRIPTION
The XRD9814B/9816B is a fully integrated, high-per-
formance analog signal processor/digitizer specifi-
cally designed for use in 3-channel linear Charge
Coupled Device (CCD) and Contact Image Sensitive
(CIS) imaging applications.
Each channel of the XRD9814B/9816B includes a
Correlated Double Sampler (CDS), Programmable
Gain Amplifier (PGA) and channel offset adjustment.
After gain and offset adjustment, the analog inputs are
sequentially sampled and digitized by an accurate 14/
16-bit A/D converter. The analog front-end can be
configured for inverting/non-inverting input, CDS or
sample-hold (S/H) mode, or AC/DC coupling,
making the XRD9814B/9816B suitable for use in CCD,
CIS and other data acquisition applications.
The CDS mode of operation supports both line and
pixel-clamp modes and can be used to achieve signifi-
cant reduction in system 1/f noise and CCD reset
clock feed-through. In S/H mode the internal DC-
restore voltage clamp can be enabled or disabled to
support AC-coupled or DC inputs. Sampling mode,
10-bit PGA gain (1024 linear steps), 8-bit fine offset
adjustment (256 linear steps), 2-bit gross offset adjust-
ment and input signal polarity are all programmable
through a serial interface. PGA gain range is 1 to 10,
and channel offset range is -300mV to 300mV for fine
adjustment and additional -400mV to +200mV for
gross offset adjustment. The A/D Full-Scale Range
(FSR) is programmable to 2V or 3V.
ORDERING INFORMATION
Part No.
XRD9814BCV
XRD9816BCV
Package Type
48-Lead TQFP
48-Lead TQFP
Temperature Range
0°C to +70°C
0°C to +70°C
Rev. 1.00
EXAR Corporation, 48720 Kato Road, Fremont, CA 94538 ⢠(510) 668-7000 ⢠FAX (510) 668-7017 ⢠www.exar.com
|
▷ |