RF69 Datasheet, PDF (8/81 Pages) List of Unclassifed Manufacturers – Low Power Integrated UHF Transceiver with On-Chip +20dBm PA

RF69
This product datasheet contains a detailed description of the RF69 performance and functionality.
1. General Description
The RF69 is a single-chip integrated circuit ideally suited for today's high performance ISM band RF applications. The
RF69's advanced features set, including state of the art packet engine greatly simplifies system design whilst the high
level of integration reduces the external BOM to a handful of passive decoupling and matching components. It is intended
for use as high-performance, low-cost FSK and OOK RF transceiver for robust frequency agile, half-duplex bi-directional
RF links, and where stable and constant RF performance is required over the full operating range of the device down to
1.8V.
The RF69 is intended for applications over a wide frequency range, including the 433 MHz and 868 MHz European and
the 902-928 MHz North American ISM bands. Coupled with a link budget in excess of 140 dB, the advanced system
features of the RF69 include a 66 byte TX/RX FIFO, configurable automatic packet handler, listen mode, temperature
sensor and configurable DIOs which greatly enhance system flexibility whilst at the same time significantly reducing MCU
requirements.
The RF69 complies with both ETSI and FCC regulatory requirements and is available in a 5x 5 mm QFN 28 lead
package
1.1. Simplified Block Diagram
Figure 1. Block Diagram
Tel: [phone] Fax: [phone] E-mail: [e-mail] http://www.hoperf.com
Page 8