RF69 Datasheet, PDF (73/81 Pages) List of Unclassifed Manufacturers – Low Power Integrated UHF Transceiver with On-Chip +20dBm PA

RF69
RegPacketConfig1 ^{7 PacketFormat}
(0x37)
6-5 DcFree
4 CrcOn
3 CrcAutoClearOff
2-1 AddressFiltering
0-
RegPayloadLength ^{7-0 PayloadLength}
(0x38)
RegNodeAdrs
(0x39)
RegBroadcastAdrs
(0x3A)
RegAutoModes
(0x3B)
7-0 NodeAddress
7-0 BroadcastAddress
7-5 EnterCondition
4-2 ExitCondition
1-0 IntermediateMode
rw
0 Defines the packet format used:
0 → Fixed length
1 → Variable length
rw
00 Defines DC-free encoding/decoding performed:
00 → None (Off)
01 → Manchester
10 → Whitening
11 → reserved
rw
1 Enables CRC calculation/check (Tx/Rx):
0 → Off
1 → On
rw
0 Defines the behavior of the packet handler when CRC
check fails:
0 → Clear FIFO and restart new packet reception. No
PayloadReady interrupt issued.
1 → Do not clear FIFO. PayloadReady interrupt issued.
rw
00 Defines address based filtering in Rx:
00 → None (Off)
01 → Address field must match NodeAddress
10 → Address field must match NodeAddress or
BroadcastAddress
11 → reserved
rw
0 unused
rw
0x40 If PacketFormat = 0 (fixed), payload length.
If PacketFormat = 1 (variable), max length in Rx, not used
in Tx.
rw
0x00 Node address used in address filtering.
rw
0x00 Broadcast address used in address filtering.
rw
000 Interrupt condition for entering the intermediate mode:
000 → None (AutoModes Off)
001 → Rising edge of FifoNotEmpty
010 → Rising edge of FifoLevel
011 → Rising edge of CrcOk
100 → Rising edge of PayloadReady
101 → Rising edge of SyncAddress
110 → Rising edge of PacketSent
111 → Falling edge of FifoNotEmpty (i.e. FIFO empty)
rw
000 Interrupt condition for exiting the intermediate mode:
000 → None (AutoModes Off)
001 → Falling edge of FifoNotEmpty (i.e. FIFO empty)
010 → Rising edge of FifoLevel or Timeout
011 → Rising edge of CrcOk or Timeout
100 → Rising edge of PayloadReady or Timeout
101 → Rising edge of SyncAddress or Timeout
110 → Rising edge of PacketSent
111 → Rising edge of Timeout
rw
00 Intermediate mode:
00 → Sleep mode (SLEEP)
01 → Standby mode (STDBY)
10 → Receiver mode (RX)
11 → Transmitter mode (TX)
Page 72
Tel: [phone] Fax: [phone] E-mail: [e-mail] http://www.hoperf.com